Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

Dual NIC setup, SBS 2003

Posted on 2013-06-27
2
Medium Priority
?
531 Views
Last Modified: 2013-06-27
We have a SBS2003 server and are about to remove the on site router from service.  We will be using SBS server to route traffic.  Is there any recommendations you have prior to implementation?  We do not have Forefront, and are using Symantec Endpoint Protection, Small Business Edition.  Not sure if it makes a difference, but we have the option to upgrade to Enterprise version of SEP.  
Connections will go from Cable modem, to SBS server, to Cisco switch, to LAN.
0
Comment
Question by:AE_JB
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 41

Accepted Solution

by:
footech earned 2000 total points
ID: 39282895
The only way I would recommend to have SBS 2003 as a router would be if you have the Premium version with ISA 2004 installed.  Otherwise, keep a router in front if it and only have one NIC enabled.
0
 

Author Closing Comment

by:AE_JB
ID: 39282937
Thanks, I will look into it.
0

Featured Post

How Blockchain Is Impacting Every Industry

Blockchain expert Alex Tapscott talks to Acronis VP Frank Jablonski about this revolutionary technology and how it's making inroads into other industries and facets of everyday life.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
This article explains the fundamentals of industrial networking which ultimately is the backbone network which is providing communications for process devices like robots and other not so interesting stuff.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

715 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question