Hi all, i have a vlan setup on a cisco 841 for guest wifi access and hp ProCurve 1810G for my switch and cisco AP541N for my wireless access points. I have vlan 1 setup for my main subnet which is a 10.10.2.x and my vlan 100 is 192.168.1.x for wifi. Now the wireless on my ap for vlan 1 works like it should and i can access everything. When you connect to an ssid for vlan 100 you get connected to the ap but dont get an ip from the router which is configured for dhcp for the 192.168.1.x subnet. On the Hp switch i have ports 13 - 16 tagged on the vlan 100 and on vlan 1 they are untagged. the router is on port 1 and is untagged for both vlans. Now my main issue i think is the switch as if i tag port 1 for both vlans i loose all traffic thru this switch via the router. If i tag for just vlan 100 i get traffic to pass but still no ip for connected clients on vlan 100. Any ideas on where to look next?