Solved

VPN Client cannot ping all devices

Posted on 2013-06-30
1
531 Views
Last Modified: 2013-06-30
Hi there

VPN network newbie.

Thanks to lots of good decriptions I was able to configute my Netgear Firewall FVS318G and my laptop using Shrew VPN client software successfully. Now I am in the remote network.

When I initially connected to the network, everything was working just fine. Now (without having changed any settings) I can only ping or RDP to some devices and not all of them. They are all in the same subnet & I can use RDP fine within the local network. It's only when I use VPN, that some devices work and others don't?

Does anyone have an idea what this strange behaviour could be?
0
Comment
Question by:riffrack
1 Comment
 
LVL 69

Accepted Solution

by:
Qlemo earned 500 total points
ID: 39288204
On dial-in, do you get an IP from the same subnet as the devices? If not, they might have firewall rules to only allow "local" traffic.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Using Windows 2008 RRAS, I was able to successfully VPN into the network, but I was having problems restricting my test user from accessing certain things on the network.  I used Google in order to try to find out how to stop people from accessing c…
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question