?
Solved

route traffic over ipsec vpn tunnel rras

Posted on 2013-07-01
3
Medium Priority
?
895 Views
Last Modified: 2013-09-05
i currently have a site to site tunnel setup on rras but i cant route any traffic through it.  It is supposed to route automatically but apparently its not, do i need to do anything extra?
0
Comment
Question by:Kylo Ren
  • 2
3 Comments
 
LVL 20

Expert Comment

by:rauenpc
ID: 39293102
Do you have the "use default gateway on remote network" setting checked?
0
 
LVL 5

Author Comment

by:Kylo Ren
ID: 39293107
this is a site to site tunnel, does that option still apply?
0
 
LVL 20

Accepted Solution

by:
rauenpc earned 1500 total points
ID: 39293137
Probably not... perhaps I should read all the words before posting...

http://albertsiow.wordpress.com/2009/02/23/site-to-site-pptp-vpn-tunnel/

The above is a decent example of a very basic site to site setup. You may have already come across this. My next question would be routing. Make sure both servers have the correct remote subnets configured so they know what traffic to send across the tunnel, and also make sure your networking equipment knows to use the servers as a gateway for those remote networks.
0

Featured Post

NFR key for Veeam Agent for Linux

Veeam is happy to provide a free NFR license for one year.  It allows for the non‑production use and valid for five workstations and two servers. Veeam Agent for Linux is a simple backup tool for your Linux installations, both on‑premises and in the public cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
After seeing many questions for JRNL_WRAP_ERROR for replication failure, I thought it would be useful to write this article.
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
Suggested Courses

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question