schuitkds
asked on
Sonicwall Site to Site VPN
Hello
trying to setup a sonicwall site to site vpn where the remote office can access multiple subnets at the main office.
ex: main internal scheme 10.140.56.xxx
secondary internal scheme is 10.140.58.xxx
is this possible and if so how?
i have the vpn up but the remote side can only see the 10.140.56.xxx systems or objects on the network
trying to setup a sonicwall site to site vpn where the remote office can access multiple subnets at the main office.
ex: main internal scheme 10.140.56.xxx
secondary internal scheme is 10.140.58.xxx
is this possible and if so how?
i have the vpn up but the remote side can only see the 10.140.56.xxx systems or objects on the network
On the VPN -> Settings tab select Configure for the STS VPN you set up.
Then select the Network tab in the pop up window.
In the first section "Local Networks" the first radio button should be selected (Choose local network from list). From here you must select (or first create) an item that includes all the subnets that you want to be accessed from the remoted side of the VPN at the local site.
In the second section "Remote Networks", the last radio button should be selected (Choose destination network from list). From here you must select (or first create) an item that includes all the remote subnets you want to be accessed from the local side of the VPN at the remote site.
That should do it.
Then select the Network tab in the pop up window.
In the first section "Local Networks" the first radio button should be selected (Choose local network from list). From here you must select (or first create) an item that includes all the subnets that you want to be accessed from the remoted side of the VPN at the local site.
In the second section "Remote Networks", the last radio button should be selected (Choose destination network from list). From here you must select (or first create) an item that includes all the remote subnets you want to be accessed from the local side of the VPN at the remote site.
That should do it.
ASKER
How do i add the secondary internal ip scheme Lan Subnet to the firewall ?
if i select Lan Subnets would that do it?
if i select Lan Subnets would that do it?
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
http://www.youtube.com/watch?v=sXyzj2cuNwo