<div>
.. Sorry, was a mistaken comment
</div>


<div>
Are these Sonicpoints?<br />
<br />
First I would ping any of the access points from the Sonicwall (using diagnostics) to be sure they are accessible on the X2 port.<br />
<br />
How you proceed from here depends upon whether they are Sonicpoints or not.<br />
<br />
If not, a rule to permit all traffic from X0 to X2, and the reverse from X2 to X0. You could tighten this by putting the given ip addresses in a Group, and restricting this access to that Group as opposed to ALL.
</div>


<div>
They are not sonic points. They are Cisco 1240 A/G access points.
</div>


<div>
Did you try pinging the access points from the Sonicwall diagnostics?
</div>


<div>
I've requested that this question be deleted for the following reason:<br />
<br />
Not enough information to confirm an answer.
</div>


<div>
This was the only solution that I could make work.
</div>


<div>
<div class="content wysiwyg-content">
I have an Sonicwall tz200 and have configures the X0 port for our Admin Lan, the X1 port is the Wan and the X2 port is Guest. X0 is configured for 172.16.1.xxx port X2 is configured 10.10.10.xxx and gives DHCP addressing from 10.10.10.2 - 10.10.10.254. I have wireless access points connected to the X2 port and have assigned them Ip addresses in the 172.16.1.xxx range. <br />
<br />
I need to be able to access the Access points configuration from a computer on the X0 interface. IE from 172.16.1.2 on port X0 to 172.16.1.80 on port X2.<br />
<br />
I have tried creating and access rule but I am unable to connect.<br />
<br />
Any ideas?
</div>
</div>


I have an Sonicwall tz200 and have configures the X0 port for our Admin Lan, the X1 port is the Wan and the X2 port is Guest. X0 is configured for 172.16.1.xxx port X2 is configured 10.10.10.xxx and gives DHCP addressing from 10.10.10.2 - 10.10.10.254. I have wireless access points connected to the X2 port and have assigned them Ip addresses in the 172.16.1.xxx range. 

I need to be able to access the Access points configuration from a computer on the X0 interface. IE from 172.16.1.2 on port X0 to 172.16.1.80 on port X2.

I have tried creating and access rule but I am unable to connect.

Any ideas?

Are these Sonicpoints?

First I would ping any of the access points from the Sonicwall (using diagnostics) to be sure they are accessible on the X2 port.

How you proceed from here depends upon whether they are Sonicpoints or not.

If not, a rule to permit all traffic from X0 to X2, and the reverse from X2 to X0. You could tighten this by putting the given ip addresses in a Group, and restricting this access to that Group as opposed to ALL.

They are not sonic points. They are Cisco 1240 A/G access points.

Did you try pinging the access points from the Sonicwall diagnostics?

I&#39;ve requested that this question be deleted for the following reason:

Not enough information to confirm an answer.

This was the only solution that I could make work.

Access Rule

Network security consists of the policies adopted to prevent and monitor authorized access, misuse, modification, or denial of a computer network and network-accessible resources. Network security involves the authorization of access to data in a network, and covers a variety of computer networks; conducting transactions and communications among businesses, government agencies and individuals. Networks can be private, such as within a company, and others which might be open to public access.

Network Security

Software firewalls, also known as host-based firewalls, provide a layer of software on one host that controls network traffic in and out of that single machine. Most operating systems now include firewall software, but many available software firewalls include central distribution, antivirus systems and disaster recovery.

Software Firewalls

Network Management involves issues that are independent of specific hardware or software, including email policies, upgrade planning, backup scheduling and working with managed service providers for Desktop-As-A-Service (DaaS), Software-As-A-Service (SaaS) and the like through the use of tools, coupled with manufacturer standards, best practice guidelines, policies and procedures plus all other relevant documentation. Network management also includes monitoring, alerting and reporting, management reporting, planning for device or service updates, the backup of configurations, the setting of key performance indicators and measures (KPIs/KPMs), associated service level agreements and problem records as part of the IT Service Management (ITSM) framework.