troubleshooting Question

Routing between sites with MPLS/IPSEC

Avatar of goraek
goraekFlag for Australia asked on
RoutersNetworkingNetwork Operations
4 Comments1 Solution507 ViewsLast Modified:

We have 2 new sites with a MPLS link.
We have an HP procurve switch at each site.
We need to be able to route one network to another over the MPLS network.
Our ISP has made the change to allow 2 subnets to be routable (eg. and - VLAN10 and VLAN11 respectively).

However we are not able to ping each other.
We added an IP address for each VLAN (eg and, but still no luck.

What do we need to configure to make the 2 subnet routable via the MPLS link?


Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 4 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 4 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros