asked on
Hi,
I am unable to present storage to my Esxi5 host. Currently my storage device is an EMC Vnxe 3150 and the host is an UCS C22 w/ quad port nic for iSCSI. I have created the necessary vmkernels for the physical adapters, but when I attempt to add storage I am unsuccessful.
A few questions I am not sure of..
1. Do I need to change to name of the initiaitor to the one of the SAN?
2. Do I need to add an additional vSwitch to segement traffic?
3. Do I need to configure the physical nics presented to the host from quad nic, instead of the creating a software iscsi adapter?
Thanks in advance!
I am unable to present storage to my Esxi5 host. Currently my storage device is an EMC Vnxe 3150 and the host is an UCS C22 w/ quad port nic for iSCSI. I have created the necessary vmkernels for the physical adapters, but when I attempt to add storage I am unsuccessful.
A few questions I am not sure of..
1. Do I need to change to name of the initiaitor to the one of the SAN?
2. Do I need to add an additional vSwitch to segement traffic?
3. Do I need to configure the physical nics presented to the host from quad nic, instead of the creating a software iscsi adapter?
Thanks in advance!
Join the community to see this answer!
Join our exclusive community to see this answer & millions of others.
Unlock 1 Answer and 2 Comments.
Learn from the best
Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.
Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 2 Comments.
Try for 7 days”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.