Have IBM xSeries Server with an MR10i controller.
Running ESXi 5.0
Wanted to be able to see what was going on with the RAID controller using the MegaRAID storage manager software. We have the MSM installed on a workstation along with the vSphere client.
We downloaded and installed what we thought were the correct .vib files and we made sure the CIMS service was started. When we try to connect...nothing.
Now we know the MSM is working because we have another xSeries that is a physical machine running W2K8 Server and the MSM will discover the RAID controller for that machine over the network.
What are we doing wrong? I am thinking maybe we have the wrong .vib file for the MR10i, but I am not sure.
Any help or direction would be great.
Our community of experts have been thoroughly vetted for their expertise and industry experience.
The Fellow title is reserved for select members who demonstrate sustained contributions, industry leadership, and outstanding performance. We will announce the experts being inducted into the Experts Exchange Fellowship during the annual Expert Awards, but unlike other awards, Fellow is a lifelong status. This title may not be given every year if there are no obvious candidates.
The Expert of the Year award recognizes an expert who helped improve Experts Exchange in the past year through high levels of contributions and participation on site. This award is given to the expert who has achieved the highest levels of participation, while maintaining quality contributions and professionalism.