troubleshooting Question

SonicWALL to Control Traffic between 2 Subnets

Avatar of PRNComputers
PRNComputersFlag for United States of America asked on
Networking Hardware-OtherHardware FirewallsWeb Servers
14 Comments1 Solution560 ViewsLast Modified:
We have a client that is adding an internal web server for the purposes of taking reservations internally. The basic setup is as follows:

- The domain controller is running SBS 2011 and the web server Windows 7, each on a separate
- A single SonicWALL TZ-100 is used as both the gateway and DHCP server for both subnets
- Subnet for domain is 10.0.0.x and webserver is 10.0.1.x, both subnet masks are and gateways are and, respectively
- There is a subdomain for their website that is being pointed to the static IP of the company, and that is already being properly routed to the web server over Port 443 using the SonicWALL

Currently, we can ping both gateways as well as the domain controller from the web server. We can also ping both gateways from the domain controller, but not the web server.

We need to set up some type of rules or routes or whatever that will block all communication between the two internal networks, except on ports 1702 and 7000. How would we go about doing this?
Aaron Tomosky
Director, SD-WAN Solutions

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 14 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 14 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros