duncanb7
asked on
NEC NTA 3110 ADSL modem router
Dear Expert,
http://www.google.com.hk/#site=&source=hp&q=nta+3110&oq=nta+3110&gs_l=hp.3..0j0i30l4j0i5i30l5.2243.4406.0.4723.8.8.0.0.0.0.111.553.7j1.8.0...0.0.0..1c.1.17.hp.Zmj6XYoCsAw&bav=on.2,or.&bvm=bv.48705608,d.aGc&fp=2f897365aaf46df0&biw=1008&bih=679
ANyone has the software copy of NEC NTA 3110 ADSL modem router manual,
if so, please send it to me.
I want to know the exact admin login web page IP in order to set back
the modem from bridge mode to router mode.
I try 192.168.1.1 is not working for the NEC router( that is working for CISCO or other router only)
Anyone knows the NEC's router login page IP, please let me try at my side if you know the IP.
Be reminded the NEC NTA 3110 router is no reset pin at the back of the device and
has one RS 232 console port, and I don't know what the function of the port is.
Peple say in google search that port is using to outdated 56k modem access or using to control the modem internal setting but still confusing to me which fuction is correct.
Please send it to me if any manual or information about the IP of router of NEC NTA 3110
Please advise
Duncan
http://www.google.com.hk/#site=&source=hp&q=nta+3110&oq=nta+3110&gs_l=hp.3..0j0i30l4j0i5i30l5.2243.4406.0.4723.8.8.0.0.0.0.111.553.7j1.8.0...0.0.0..1c.1.17.hp.Zmj6XYoCsAw&bav=on.2,or.&bvm=bv.48705608,d.aGc&fp=2f897365aaf46df0&biw=1008&bih=679
ANyone has the software copy of NEC NTA 3110 ADSL modem router manual,
if so, please send it to me.
I want to know the exact admin login web page IP in order to set back
the modem from bridge mode to router mode.
I try 192.168.1.1 is not working for the NEC router( that is working for CISCO or other router only)
Anyone knows the NEC's router login page IP, please let me try at my side if you know the IP.
Be reminded the NEC NTA 3110 router is no reset pin at the back of the device and
has one RS 232 console port, and I don't know what the function of the port is.
Peple say in google search that port is using to outdated 56k modem access or using to control the modem internal setting but still confusing to me which fuction is correct.
Please send it to me if any manual or information about the IP of router of NEC NTA 3110
Please advise
Duncan
David Johnson, CD
did you try using your gateway address?
ASKER
yes, but is not working since it is 0.0.0.0 that is proved it is in using bridge mode on ADSL router
and I try to
do tracert yahoo.com and copy the first entry IP of tracert
output that is also not wokring(10.193.235.85)
I already sent email to ISP support guy but no return yet,
And I think I need to consider to kwon to use the RS232 9pin console port
to solve my issue.
and I try to
do tracert yahoo.com and copy the first entry IP of tracert
output that is also not wokring(10.193.235.85)
I already sent email to ISP support guy but no return yet,
And I think I need to consider to kwon to use the RS232 9pin console port
to solve my issue.
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
ASKER
I try http://setup.net and 192.168.8.1 that ISP told me to do so
and that is also mentioned in your pdf document
and
both is not correct. And ISP support go to check it again and reply
the device I am using that is just ADLS modem and no router function so
the modem is no any admin login page.
Last question, ask BM-vnext, could we have ADSL model without router function with
4 ports Ethernet connection. I mean on the modem we can use one phone line to
share 4 ports computers connectionat the same time. Is it possible without router function ?
Now I am using the modem with two computer, on every computer I do PPPOE
connection individually, both computer could go internet(www.goggle.com) at the same
using only one modem and one phone line
Plese comment it
and that is also mentioned in your pdf document
and
both is not correct. And ISP support go to check it again and reply
the device I am using that is just ADLS modem and no router function so
the modem is no any admin login page.
Last question, ask BM-vnext, could we have ADSL model without router function with
4 ports Ethernet connection. I mean on the modem we can use one phone line to
share 4 ports computers connectionat the same time. Is it possible without router function ?
Now I am using the modem with two computer, on every computer I do PPPOE
connection individually, both computer could go internet(www.goggle.com) at the same
using only one modem and one phone line
Plese comment it
ASKER
Memo: ISP told me only 25 ,135,139,1430 TCP/IP is blocked , other ports can be used by user client
ASKER
Memo: FF-FF-FF-FF-FF-FF-FF Physical address of LAN card is abnormal, probably it is due
to the card connection problem on old type of computer.
to the card connection problem on old type of computer.