tonycwl
asked on
Exchange 2010 cannot send or receive internal mail
Dear All,
just finish migrate exchange 2003 to exchange 2010, I just create a new mailbox in exchange 2010 for testing, I can send or receive email to external. but can;t send or receive from existing exchange 2003, I know this should be the routing connector error. I did remove all routing connector and use new-routinggroupconnector to rebuild but still no luck.
just finish migrate exchange 2003 to exchange 2010, I just create a new mailbox in exchange 2010 for testing, I can send or receive email to external. but can;t send or receive from existing exchange 2003, I know this should be the routing connector error. I did remove all routing connector and use new-routinggroupconnector to rebuild but still no luck.
you would need to create additional routing connector, Please refer the below command and its referenced article also
http://technet.microsoft.c om/en-us/l ibrary/aa9 97292%28v= exchg.141% 29.aspx
New-RoutingGroupConnector -Name "Interop RGC" -SourceTransportServers "Ex2010Hub1.contoso.com" -TargetTransportServers "Ex2003BH1.contoso.com" -Cost 10 -Bidirectional $true
http://technet.microsoft.c
ASKER
Dear Both,
I did use new-routinggroupconnector to create two-way mail flow, but still cannot send/recevive email for internal
I did use new-routinggroupconnector to create two-way mail flow, but still cannot send/recevive email for internal
For smooth mailflow between Exchange 2003 & Exchange 2010 there should be routing group connector between 2003 to 2010 and vice versa.
Also ensure you can successfully telnet both the servers from another one.
Tahir
Also ensure you can successfully telnet both the servers from another one.
Tahir
Please restart the "Routing Engine" service in Exchange 2003 and try to telnet also
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Dear Sir,
I can telnet from both side without issue
Ihave no communication in Default SMTP Virtual Server
below is the report
[PS] C:\Windows\system32>get-ro utinggroup connector | FL
RunspaceId : 34882f92-a754-4714-923f-55 f7d2364f49
TargetRoutingGroup : First Routing Group
Cost : 100
TargetTransportServers : {INTSRV}
ExchangeLegacyDN : /o=QUALIMAN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Confi guration/c n=Conne
ctions/cn=INTSRV-EXCHSRV
PublicFolderReferralsEnabl ed : True
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {EXCHSRV}
HomeMTA : Microsoft MTA
HomeMtaServerId : EXCHSRV
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : INTSRV-EXCHSRV
DistinguishedName : CN=INTSRV-EXCHSRV,CN=Conne ctions,CN= Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routi ng
Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Admin istrative Groups,CN=QU
ALIMAN,CN=Microsoft Exchange,CN=Services,CN=Co nfiguratio n,DC=quali man,DC=com ,DC=hk
Identity : INTSRV-EXCHSRV
Guid : 834deb05-bf20-4231-b089-7d ab2a3a55c6
ObjectCategory : qualiman.com.hk/Configurat ion/Schema /ms-Exch-R outing-Gro up-Connect or
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnecto r}
WhenChanged : 8/12/2013 1:19:44 AM
WhenCreated : 8/12/2013 1:19:44 AM
WhenChangedUTC : 8/12/2013 8:19:44 AM
WhenCreatedUTC : 8/12/2013 8:19:44 AM
OrganizationId :
OriginatingServer : intsrv.qualiman.com.hk
IsValid : True
RunspaceId : 34882f92-a754-4714-923f-55 f7d2364f49
TargetRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
Cost : 100
TargetTransportServers : {EXCHSRV}
ExchangeLegacyDN : /o=QUALIMAN/ou=First Administrative Group/cn=Configuration/cn= Connection s/cn=INTSR V-EXCH
SRV
PublicFolderReferralsEnabl ed : True
SourceRoutingGroup : First Routing Group
SourceTransportServers : {INTSRV}
HomeMTA : Microsoft MTA
HomeMtaServerId : INTSRV
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : INTSRV-EXCHSRV
DistinguishedName : CN=INTSRV-EXCHSRV,CN=Conne ctions,CN= First Routing Group,CN=Routing Groups,CN=First Admin
istrative Group,CN=Administrative Groups,CN=QUALIMAN,CN=Micr osoft Exchange,CN=Services,C
N=Configuration,DC=qualima n,DC=com,D C=hk
Identity : INTSRV-EXCHSRV
Guid : 4a948f89-5e89-4fbb-af50-3e b8dc9f3987
ObjectCategory : qualiman.com.hk/Configurat ion/Schema /ms-Exch-R outing-Gro up-Connect or
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnecto r}
WhenChanged : 8/12/2013 1:19:45 AM
WhenCreated : 8/12/2013 1:19:45 AM
WhenChangedUTC : 8/12/2013 8:19:45 AM
WhenCreatedUTC : 8/12/2013 8:19:45 AM
OrganizationId :
OriginatingServer : intsrv.qualiman.com.hk
IsValid : True
I can telnet from both side without issue
Ihave no communication in Default SMTP Virtual Server
below is the report
[PS] C:\Windows\system32>get-ro
RunspaceId : 34882f92-a754-4714-923f-55
TargetRoutingGroup : First Routing Group
Cost : 100
TargetTransportServers : {INTSRV}
ExchangeLegacyDN : /o=QUALIMAN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Confi
ctions/cn=INTSRV-EXCHSRV
PublicFolderReferralsEnabl
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {EXCHSRV}
HomeMTA : Microsoft MTA
HomeMtaServerId : EXCHSRV
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : INTSRV-EXCHSRV
DistinguishedName : CN=INTSRV-EXCHSRV,CN=Conne
Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Admin
ALIMAN,CN=Microsoft Exchange,CN=Services,CN=Co
Identity : INTSRV-EXCHSRV
Guid : 834deb05-bf20-4231-b089-7d
ObjectCategory : qualiman.com.hk/Configurat
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnecto
WhenChanged : 8/12/2013 1:19:44 AM
WhenCreated : 8/12/2013 1:19:44 AM
WhenChangedUTC : 8/12/2013 8:19:44 AM
WhenCreatedUTC : 8/12/2013 8:19:44 AM
OrganizationId :
OriginatingServer : intsrv.qualiman.com.hk
IsValid : True
RunspaceId : 34882f92-a754-4714-923f-55
TargetRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
Cost : 100
TargetTransportServers : {EXCHSRV}
ExchangeLegacyDN : /o=QUALIMAN/ou=First Administrative Group/cn=Configuration/cn=
SRV
PublicFolderReferralsEnabl
SourceRoutingGroup : First Routing Group
SourceTransportServers : {INTSRV}
HomeMTA : Microsoft MTA
HomeMtaServerId : INTSRV
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : INTSRV-EXCHSRV
DistinguishedName : CN=INTSRV-EXCHSRV,CN=Conne
istrative Group,CN=Administrative Groups,CN=QUALIMAN,CN=Micr
N=Configuration,DC=qualima
Identity : INTSRV-EXCHSRV
Guid : 4a948f89-5e89-4fbb-af50-3e
ObjectCategory : qualiman.com.hk/Configurat
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnecto
WhenChanged : 8/12/2013 1:19:45 AM
WhenCreated : 8/12/2013 1:19:45 AM
WhenChangedUTC : 8/12/2013 8:19:45 AM
WhenCreatedUTC : 8/12/2013 8:19:45 AM
OrganizationId :
OriginatingServer : intsrv.qualiman.com.hk
IsValid : True
Could you please confirm, did you restarted the routing engine service in exchange 2003, if not. please restart the service and check the mail flow.
Thanks
Thanks
ASKER
I did restart router engine..
also I find that I receive the error message return by server said
the e-mail account does not exist at the organization this messages was sent to......
also I find that I receive the error message return by server said
the e-mail account does not exist at the organization this messages was sent to......
could you please paste NDR here, if you would not mind and hide your confidential data..
ASKER
The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
tried but still can't send from exchange 2003 to exchange 2010 or exchange 2010 to exchange 2003, also I found another issue, I can;t setup POP3 or IMAP in outlook 2010, only way to use in OWA
ASKER
once more question, do I need to apply SSL cert to use pop3 or imap in exchange 2010?
ASKER
final update...
I can send email from exchange 2003 to 2010 internally but can;t send email from 2010 to 2003
outlook can use exchange to connect but no imap and pop3, dont know shall I need SSL.
I can send email from exchange 2003 to 2010 internally but can;t send email from 2010 to 2003
outlook can use exchange to connect but no imap and pop3, dont know shall I need SSL.
ASKER
I figured it out. Looks like I didnt search hard enough. Under the properties for the SMTP Virtual Server on Exchange 2003 and then Under the Access tab and Authentication, I needed to have Integrated Windows Authentication checked.
by the way I am happy to split the point which give me a way to go..
by the way I am happy to split the point which give me a way to go..
I think you should verify the permissions "Routing group connectors" & test the connector is used for one-way or two-way mail flow New-RoutingGroupConnector