Kirk48906
asked on
CX700 unable to get to Setup Page
My company just purchased a CX700 SAN and I'm tasked with setting this up. We purchased it used and I really am just starting to learn this. First task is to configure the basics. I've got the unit to apparently boot from the first 5 disks of DAE0. But I have a couple of questions.
The SP fault light on either SP never stops the 4 blinks per second that is described as "BOOTING" phase. Is this normal?
And when I create the PPP connection and point a browser to 192.168.1.1/setup the page comes back "unable to display, connection closed" I've never been able to get anywhere beyond this point, which seems to be so easy for everyone else.
Suggestions would be greatly appreciated.
The SP fault light on either SP never stops the 4 blinks per second that is described as "BOOTING" phase. Is this normal?
And when I create the PPP connection and point a browser to 192.168.1.1/setup the page comes back "unable to display, connection closed" I've never been able to get anywhere beyond this point, which seems to be so easy for everyone else.
Suggestions would be greatly appreciated.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Hi Kirk48906. Any update on this?
Please accept https:#a39443768 as the answer