Configure Catalyst 3850’ wireless

I am new to configure Catalyst 3850’ wireless. I hope some one can confirm my basic steps. If I miss some steps, please add it for me. Thank you in advance. Here they are:

1. Connect the several 3850 together physically
2. Configure it to bind them together(one switch is active, others are member/ standby)
3. Confirm the configured stack 3850 work well
4. Configure relative trunk link and ip add
5. Use GUI to configure license and wlan
6. test ap function
Who is Participating?
Craig BeckConnect With a Mentor Commented:
Unfortunately it's against forum rules.  I'm happy to help here though.
LibipappachenConnect With a Mentor Commented:
EESkyAuthor Commented:
Thank you for your reply. It is helpful. i hope someone can give some suggestion on wireless
Craig BeckConnect With a Mentor Commented:
You pretty much have what you need there.

You'll need to give the AP an IP address (either static or via DHCP) but everything else is there.  It's worth noting that the GUI is very flaky.

This will help if you choose to configure via CLI...
EESkyAuthor Commented:
Craigbeck, Thank you for your reply. Can you send an email to me ? I am sorry to ask this. If you like to do,  I am going to leave my email address here.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.