Switch stuck in a nonoperational state
I have a HP Procurve 2610 48 Port for some reason all the lights contently on stuck on and there is no communication trough the consul or the ports. I have tried reset and clear but no luck. Is there anything else you think I could try?
Thanks
Thanks
Last Comment
Craig Beck
Call HP for an RMA - most of their switches have a limited lifetime warranty.
ASKER CERTIFIED SOLUTION
THIS SOLUTION IS ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
Switches / Hubs
A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.
23K
Questions
--
Followers
--
Top Experts
Get a personalized solution from industry experts
TRUSTED BY
