CHI-LTD
asked on
HP Switch Command to Disable ICMP and STP
I did find this, but can't now.
Ideas?
Ideas?
HP CLIs are different model by model. Please specify the exact Model of your switch.
ASKER
2910al-48g
You want to disable spanning-tree?
And what do you mean by "disable icmp"?
And what do you mean by "disable icmp"?
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Sorry, typo from the provider. Guess IGMP..?
Just needs to be disabled on the 3x ports on my vlan20 that are going to be connecting to my voice switch/kit.
Just needs to be disabled on the 3x ports on my vlan20 that are going to be connecting to my voice switch/kit.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
HP-E2910al-48G-PoE(config) # show spanning-tree
Multiple Spanning Tree (MST) Information
STP Enabled : No
HP-E2910al-48G-PoE(config) # show ip igmp config
IGMP Service Config
Control unknown multicast [Yes] : Yes
Forced fast leave timeout [0] : 4
Delayed flush timeout [0] : 0
VLAN ID VLAN Name IGMP Enabled Querier Allowed Querier Interval
------- ------------ ------------ --------------- ----------------
1 DEFAULT_VLAN No Yes 125
20 Voice No Yes 125
HP-E2910al-48G-PoE(config) #
Multiple Spanning Tree (MST) Information
STP Enabled : No
HP-E2910al-48G-PoE(config)
IGMP Service Config
Control unknown multicast [Yes] : Yes
Forced fast leave timeout [0] : 4
Delayed flush timeout [0] : 0
VLAN ID VLAN Name IGMP Enabled Querier Allowed Querier Interval
------- ------------ ------------ --------------- ----------------
1 DEFAULT_VLAN No Yes 125
20 Voice No Yes 125
HP-E2910al-48G-PoE(config)
Well, then both STP and IGMP are disabled, right?
ASKER
Looks like it!
Thanks
Thanks
Glad to be of help