asked on

Exchange 2003 to Exchange 2010 send and receive Issues - Help Plelase

Exchange 2003 is my current email server. I just finished building a 2010 exchange server and it seems to be running correctly but......
-I can connect to Exchange 2003 via the web, and Outlook client
-I can send mail to my new Exchange server 2010 from my exchange 2003,
-I can send mail to my gmail account(external) to the new email server 2010 and
-I can send mail to users in the company, using the internal domain name
(Internal corp.biotone.com ..........External is Biotone.com)

My Exchange 2010 server is connected to the old mail server 2003,
I can see all the mail boxes in exchange 2010 that are on my exchange 2003 server

-I can add a new user to the exchange 2010 and I am able to use a client to connect to the NEW mailbox,
-I new client can receive email to my gamil account but cannot reply(goes into lala land)
-I can send emails from the old mail server 2003 to the new mail server 2010
-I cannot reply back to any of these environments...I not sure I have a outbound transport setup[ in exchange 2010?

Objectives:
First I like to get the internal email setup correctly to send emails between the legacy email server and the exchange 2010?
(before I start to move mail boxes off the old server 2003)
Second I like to have the capability to send emails from my exchange server 2010 to the outside mail services, like gmail?

So what have I done wrong?

ASKER CERTIFIED SOLUTION

Steve

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

Scott Kunau

I had many of the same problems when I did a E2k3 to E2k10 "upgrade". We over-engineered the send/smtp connector coming out of e2k3. The company had a firewall directing all port 25 traffic to e2k3 which was supposed to forward undeliverable (meaning moved mailboxes) to the e2k10 server. We could see the messages to be forwarded in the e2k3 queues but they wouldn't move.

Many of the things you wrote above were occurring successfully for us. Finally we deleted the special smtp connector that was set up from e2k3 to e2k10 and we deleted the receive connector on the e2k10 side and started over. We put the smtp connector back into place for port 25 traffic from the firewall (Internet email) and confirmed all e2k3 users were receiving email because like you, the bulk of the users were still on e2k3. Next, as I recall (its been 18 months) we confirmed a send connector was in place to be able to send internal email back to the e2k3 box which then forwarded it to the Internet...no external email was sent out or received from the Internet by the new e2k10 server initially.

As I recall, we followed something like the steps here:

http://technet.microsoft.com/en-us/library/dd638130%28v=exchg.141%29.aspx

But as I said we over-engineered the connectors between the two servers by putting one too many smtp connectors outbound from e2k3 to e2k10.

I noticed in reading the above website that an AD group gets created, assuming your e2k3 is in "native" mode...I assume you've done that. It allows the two servers to send/receive email.

I don't know if any of this helps you but it does and will work. Once mailboxes were all moved...which btw, failed until we realized there is a permission that must be granted on the e2k3 mailboxes in order to get them to move over...we changed the send connector on the new e2k10 server to send/receive from the Internet (i.e. firewall) and after a couple of months, turned off the old e2k3 server after removing it per Microsoft tech docs.

Scott

Hypercat (Deb)

First of all, you need a 2-way routing group connector on both servers - Exchange 2010 to Exchange 2003 and Exchange 2003 to Exchange 2010. Do you have these connectors set up?

Hypercat (Deb)

The routing group connectors allow mail flow between the two Exchange servers. On the Exchange 2010 server, the Send connector(s) control mail flow to the outside world and the Receive connector(s) control mail flow internally between the server and the clients who are connecting to mailboxes on that server and externally from the outside world to internal mailboxes. NOTE: This is in the simplest world possible, which is a single Exchange 2003 server and a single Exchange 2010 server with all mailbox roles on it. If your configuration is more complex, please post that information here so that we can take it into account.

Scott Johnston

ASKER

I had conector setup and in doing testing I removed both, now I think I am SOL.
I think I want to start from the beginning again, but am not sure what the inpact is if I format the server and re-install the OS and then re-install the exchange server?
Or can I rebuild the RGC for the old echange server ?

At this point I should of just copies PST files and the added the emails to the new server once I added the new mail boxes...this migration is not very clean!!!

Scott Johnston

ASKER

I removed my connectors and now nothing is working.....except mail flow to the internet.
What the hell have I done...I think I will re-format and start from scratch...Just not sure if I can?

Scott Kunau

Don't re-format. Rebuild your connectors.

1) confirm Internet email to/from the Exch 03 users.
2) confirm internal email to/from the Exch 03 users.

3) Since you don't necessarily want to remove roles from the Exch 10 server, start with creating a receive connector on it and use only the IP address of the Exch 03 server and set the permissions I believe to both Exchange Servers and Legacy Exchange (I don't have either Exchange system to look at tonight so am trying to visualize what you'll see)

4) On the Exch 03 create a connector in your routing group that points to the Exch 10 server. I believe this should be set to SMTP Virtual.

I would guess, like my setup initially, you want all Internet mail to go out of the Exch 03 server until you finishing migrating mailboxes...correct? If a newly migrated Exch 10 user sends to the Internet, the Exch 10 server should send over to Exch 03 which will handle routing to/from the Internet via your firewall. You'll need a send connector on Exch 10 for this purpose.

Here are a couple of links I found on a quick search tonight. I don't have access to the system I worked on several months ago and even if I did, we removed the Exch 03 server about 60 days after all mailboxes were migrated (kept around to make sure nothing was missed during migration).

http://social.technet.microsoft.com/Forums/exchange/en-US/938c7d5f-75f7-46f8-9ebd-71eef3318b23/mail-routing-with-exchange-20032010-coexistence

http://social.technet.microsoft.com/Forums/exchange/en-US/1832aad7-49ba-4a46-8ae0-d570ecdaf8d2/mail-flow-issues-with-exchange-2010-coexisting-exchange-2003

http://technet.microsoft.com/en-us/library/aa997292.aspx

If you choose to re-format, I assume the server hosting Exch 10, be sure to look for anything left over in AD about the "old" Exch 10 server using ADSIedit (be very careful with this utility though!).

Scott

Scott Johnston

ASKER

Thank you I not going to reformat unless a last resort I tried rebuilding rgc well see in the morning I was so close now I can only send to internet gmail account. I post more in the morning

Steve

if you do choose to reformat, do a clean UNINSTALL of exchange on the server you're going to wipe to avoid a dead server being left behind and causing AD headaches for years.

It's definitely only a last resort to wipe it though....

if you still need help we need to know where we are at present.
Easiest way may be to run the following commands and post the results (after amending a few things for privacy, obviously)

get-routinggroupconnector |fl
get-transportserver |fl
get-transportconfig

Open in new window

Scott Johnston

ASKER

I be glad to post these results but am not sure what information I should not post? AS for testing since last night the new RGC'sI created are not working or?
Please advise...and i will post results..

Hypercat (Deb)

totallytonto was referring to the fact that you might want to change your domain name in the results before posting for security reasons. That's a common practice here when posting error messages or information that might reveal private information about your network.

Scott Johnston

ASKER

Here are the results:

Are the routing groups correct?

[PS] C:\Windows\system32>get-routinggroupconnector

Name SourceRoutingGroup TargetRoutingGroup
---- ------------------ ------------------
Exchange RGC Exchange Routing Group (DWBGZMFD01QNBJR) First Routing Group
Exchange RGC First Routing Group Exchange Routing Group (DWBGZMFD01QNBJR)

[PS] C:\Windows\system32>get-transportserver

Name MessageTrackingLogEnabled
---- -------------------------
BMAIL True

[PS] C:\Windows\system32>get-transportconfig

ClearCategories : True
ConvertDisclaimerWrapperToEml : False
DSNConversionMode : UseExchangeDSNs
ExternalDelayDsnEnabled : True
ExternalDsnDefaultLanguage :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority :
ExternalDsnSendHtml : True
ExternalPostmasterAddress :
GenerateCopyOfDSNFor : {}
HygieneSuite : Standard
InternalDelayDsnEnabled : True
InternalDsnDefaultLanguage :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority :
InternalDsnSendHtml : True
InternalSMTPServers : {}
JournalingReportNdrTo : <>
LegacyJournalingMigrationEnabled : False
MaxDumpsterSizePerDatabase : 18 MB (18,874,368 bytes)
MaxDumpsterTime : 7.00:00:00
MaxReceiveSize : 488.3 MB (512,000,000 bytes)
MaxRecipientEnvelopeLimit : 100
MaxSendSize : unlimited
MigrationEnabled : False
OpenDomainRoutingEnabled : False
Rfc2231EncodingEnabled : False
ShadowHeartbeatRetryCount : 12
ShadowHeartbeatTimeoutInterval : 00:15:00
ShadowMessageAutoDiscardInterval : 2.00:00:00
ShadowRedundancyEnabled : True
SupervisionTags : {Reject, Allow}
TLSReceiveDomainSecureList : {}
TLSSendDomainSecureList : {}
VerifySecureSubmitEnabled : False
VoicemailJournalingEnabled : True
HeaderPromotionModeSetting : NoCreate
Xexch50Enabled : True

[PS] C:\Windows\system32>
[PS] C:\Windows\system32>get-routinggroupconnector |fl

RunspaceId : d7e19edd-ae4e-43b4-be5f-ceb33d9af463
TargetRoutingGroup : First Routing Group
Cost : 10
TargetTransportServers : {BIOMAIL}
ExchangeLegacyDN : /o=Biotone/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Connec
tions/cn=Exchange RGC
PublicFolderReferralsEnabled : True
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {BMAIL}
HomeMTA : Microsoft MTA
HomeMtaServerId : BMAIL
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Exchange RGC
DistinguishedName : CN=Exchange RGC,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Gr
oups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Biot
one,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=corp,DC=biotone,DC=com
Identity : Exchange RGC
Guid : b95149ed-0ed5-4076-876d-cde087df4c52
ObjectCategory : corp.biotone.com/Configuration/Schema/ms-Exch-Routing-Group-Connector
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnector}
WhenChanged : 9/10/2013 5:20:02 PM
WhenCreated : 9/10/2013 5:19:47 PM
WhenChangedUTC : 9/11/2013 12:20:02 AM
WhenCreatedUTC : 9/11/2013 12:19:47 AM
OrganizationId :
OriginatingServer : biopdc.corp.biotone.com
IsValid : True

RunspaceId : d7e19edd-ae4e-43b4-be5f-ceb33d9af463
TargetRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
Cost : 10
TargetTransportServers : {BMAIL}
ExchangeLegacyDN : /o=Biotone/ou=First Administrative Group/cn=Configuration/cn=Connections/cn=Exchange RGC
PublicFolderReferralsEnabled : True
SourceRoutingGroup : First Routing Group
SourceTransportServers : {BIOMAIL}
HomeMTA : Microsoft MTA
HomeMtaServerId : BIOMAIL
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Exchange RGC
DistinguishedName : CN=Exchange RGC,CN=Connections,CN=First Routing Group,CN=Routing Groups,CN=First Adminis
trative Group,CN=Administrative Groups,CN=Biotone,CN=Microsoft Exchange,CN=Services,CN=C
onfiguration,DC=corp,DC=biotone,DC=com
Identity : Exchange RGC
Guid : eb38752c-a3f1-4f9b-b9f3-d872ffcaa316
ObjectCategory : corp.biotone.com/Configuration/Schema/ms-Exch-Routing-Group-Connector
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnector}
WhenChanged : 9/10/2013 5:20:02 PM
WhenCreated : 9/10/2013 5:19:47 PM
WhenChangedUTC : 9/11/2013 12:20:02 AM
WhenCreatedUTC : 9/11/2013 12:19:47 AM
OrganizationId :
OriginatingServer : biopdc.corp.biotone.com
IsValid : True

[PS] C:\Windows\system32>get-transportserver |fl

RunspaceId : d7e19edd-ae4e-43b4-be5f-ceb33d9af463
Name : BMAIL
AntispamAgentsEnabled : False
ConnectivityLogEnabled : True
ConnectivityLogMaxAge : 30.00:00:00
ConnectivityLogMaxDirectorySize : 1000 MB (1,048,576,000 bytes)
ConnectivityLogMaxFileSize : 10 MB (10,485,760 bytes)
ConnectivityLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\Connectivity
DelayNotificationTimeout : 04:00:00
ExternalDNSAdapterEnabled : True
ExternalDNSAdapterGuid : 00000000-0000-0000-0000-000000000000
ExternalDNSProtocolOption : Any
ExternalDNSServers : {}
ExternalIPAddress :
InternalDNSAdapterEnabled : True
InternalDNSAdapterGuid : 00000000-0000-0000-0000-000000000000
InternalDNSProtocolOption : Any
InternalDNSServers : {}
MaxConcurrentMailboxDeliveries : 20
MaxConcurrentMailboxSubmissions : 20
MaxConnectionRatePerMinute : 1200
MaxOutboundConnections : 1000
MaxPerDomainOutboundConnections : 20
MessageExpirationTimeout : 2.00:00:00
MessageRetryInterval : 00:01:00
MessageTrackingLogEnabled : True
MessageTrackingLogMaxAge : 30.00:00:00
MessageTrackingLogMaxDirectorySize : 1000 MB (1,048,576,000 bytes)
MessageTrackingLogMaxFileSize : 10 MB (10,485,760 bytes)
MessageTrackingLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\MessageTracking
IrmLogEnabled : True
IrmLogMaxAge : 30.00:00:00
IrmLogMaxDirectorySize : 250 MB (262,144,000 bytes)
IrmLogMaxFileSize : 10 MB (10,485,760 bytes)
IrmLogPath : C:\Program Files\Microsoft\Exchange Server\V14\Logging\IRMLogs
ActiveUserStatisticsLogMaxAge : 30.00:00:00
ActiveUserStatisticsLogMaxDirectorySize : 250 MB (262,144,000 bytes)
ActiveUserStatisticsLogMaxFileSize : 10 MB (10,485,760 bytes)
ActiveUserStatisticsLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ActiveUsersStats
ServerStatisticsLogMaxAge : 30.00:00:00
ServerStatisticsLogMaxDirectorySize : 250 MB (262,144,000 bytes)
ServerStatisticsLogMaxFileSize : 10 MB (10,485,760 bytes)
ServerStatisticsLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ServerStats
MessageTrackingLogSubjectLoggingEnabled : True
OutboundConnectionFailureRetryInterval : 00:10:00
IntraOrgConnectorProtocolLoggingLevel : None
PickupDirectoryMaxHeaderSize : 64 KB (65,536 bytes)
PickupDirectoryMaxMessagesPerMinute : 100
PickupDirectoryMaxRecipientsPerMessage : 100
PickupDirectoryPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Pick
up
PipelineTracingEnabled : False
ContentConversionTracingEnabled : False
PipelineTracingPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\PipelineTracing
PipelineTracingSenderAddress :
PoisonMessageDetectionEnabled : True
PoisonThreshold : 2
QueueMaxIdleTime : 00:03:00
ReceiveProtocolLogMaxAge : 30.00:00:00
ReceiveProtocolLogMaxDirectorySize : 250 MB (262,144,000 bytes)
ReceiveProtocolLogMaxFileSize : 10 MB (10,485,760 bytes)
ReceiveProtocolLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ProtocolLog\SmtpReceive
RecipientValidationCacheEnabled : False
ReplayDirectoryPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Repl
ay
RootDropDirectoryPath :
RoutingTableLogMaxAge : 7.00:00:00
RoutingTableLogMaxDirectorySize : 50 MB (52,428,800 bytes)
RoutingTableLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\Routing
SendProtocolLogMaxAge : 30.00:00:00
SendProtocolLogMaxDirectorySize : 250 MB (262,144,000 bytes)
SendProtocolLogMaxFileSize : 10 MB (10,485,760 bytes)
SendProtocolLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ProtocolLog\SmtpSend
TransientFailureRetryCount : 6
TransientFailureRetryInterval : 00:05:00
AntispamUpdatesEnabled : False
InternalTransportCertificateThumbprint : 5167F82BDE5E0C8165400FF25325688FE140A7AA
TransportSyncEnabled : False
TransportSyncPopEnabled : False
WindowsLiveHotmailTransportSyncEnabled : False
WindowsLiveContactTransportSyncEnabled : False
TransportSyncExchangeEnabled : False
TransportSyncImapEnabled : False
MaxNumberOfTransportSyncAttempts : 3
MaxActiveTransportSyncJobsPerProcessor : 16
HttpTransportSyncProxyServer :
HttpProtocolLogEnabled : False
HttpProtocolLogFilePath :
HttpProtocolLogMaxAge : 7.00:00:00
HttpProtocolLogMaxDirectorySize : 250 MB (262,144,000 bytes)
HttpProtocolLogMaxFileSize : 10 MB (10,485,760 bytes)
HttpProtocolLogLoggingLevel : None
TransportSyncLogEnabled : False
TransportSyncLogFilePath :
TransportSyncLogLoggingLevel : None
TransportSyncLogMaxAge : 30.00:00:00
TransportSyncLogMaxDirectorySize : 10 GB (10,737,418,240 bytes)
TransportSyncLogMaxFileSize : 10 MB (10,485,760 bytes)
TransportSyncHubHealthLogEnabled : False
TransportSyncHubHealthLogFilePath :
TransportSyncHubHealthLogMaxAge : 30.00:00:00
TransportSyncHubHealthLogMaxDirectorySize : 10 GB (10,737,418,240 bytes)
TransportSyncHubHealthLogMaxFileSize : 10 MB (10,485,760 bytes)
TransportSyncAccountsPoisonDetectionEnabled : False
TransportSyncAccountsPoisonAccountThreshold : 2
TransportSyncAccountsPoisonItemThreshold : 2
TransportSyncAccountsSuccessivePoisonItemThreshold : 3
TransportSyncRemoteConnectionTimeout : 00:01:40
TransportSyncMaxDownloadSizePerItem : 25 MB (26,214,400 bytes)
TransportSyncMaxDownloadSizePerConnection : 50 MB (52,428,800 bytes)
TransportSyncMaxDownloadItemsPerConnection : 1000
DeltaSyncClientCertificateThumbprint :
UseDowngradedExchangeServerAuth : False
IntraOrgConnectorSmtpMaxMessagesPerConnection : 20
IsValid : True
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=BMAIL,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SP
DLT),CN=Administrative Groups,CN=Biotone,CN=Microsoft Exchange,CN=
Services,CN=Configuration,DC=corp,DC=biotone,DC=com
Identity : BMAIL
Guid : 62f4b2f1-c428-4f35-ab4a-163acc0ec577
ObjectCategory : corp.biotone.com/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass : {top, server, msExchExchangeServer}
WhenChanged : 9/5/2013 4:31:30 PM
WhenCreated : 8/14/2013 5:07:00 PM
WhenChangedUTC : 9/5/2013 11:31:30 PM
WhenCreatedUTC : 8/15/2013 12:07:00 AM
OrganizationId :
OriginatingServer : biopdc.corp.biotone.com

Steve

Hi.
You've missed the '| fl' off the end of the 1st 2 commands. Please repost.

Scott Johnston

ASKER

I am having some other problems, it seems that the SMTP connector in my exchange 2003 has some routing issues. I am getting some emails coming back I am not getting a undeliverable but i am getting a lot of message in the queue. Could this problem be related to0 the RGC I created?

Scott Johnston

ASKER

Here we can try this:

Welcome to the Exchange Management Shell!

Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List

Tip of the day #35:

Want to change the authentication settings on an Outlook Web Access virtual directory? Try the following command as an e
xample. It changes authentication from forms-based authentication to Windows authentication:

Set-OwaVirtualDirectory -Identity "OWA (Default Web Site)" -FormsAuthentication 0 -WindowsAuthentication 1

VERBOSE: Connecting to Bmail.corp.biotone.com
VERBOSE: Connected to Bmail.corp.biotone.com.
[PS] C:\Windows\system32>get-routinggroupconnector |fl

RunspaceId : 6dda6307-3761-4a19-9723-ee53c4ef1297
TargetRoutingGroup : First Routing Group
Cost : 10
TargetTransportServers : {BIOMAIL}
ExchangeLegacyDN : /o=Biotone/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Connec
tions/cn=Exchange RGC
PublicFolderReferralsEnabled : True
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {BMAIL}
HomeMTA : Microsoft MTA
HomeMtaServerId : BMAIL
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Exchange RGC
DistinguishedName : CN=Exchange RGC,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Gr
oups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Biot
one,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=corp,DC=biotone,DC=com
Identity : Exchange RGC
Guid : b95149ed-0ed5-4076-876d-cde087df4c52
ObjectCategory : corp.biotone.com/Configuration/Schema/ms-Exch-Routing-Group-Connector
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnector}
WhenChanged : 9/10/2013 5:20:02 PM
WhenCreated : 9/10/2013 5:19:47 PM
WhenChangedUTC : 9/11/2013 12:20:02 AM
WhenCreatedUTC : 9/11/2013 12:19:47 AM
OrganizationId :
OriginatingServer : biopdc.corp.biotone.com
IsValid : True

RunspaceId : 6dda6307-3761-4a19-9723-ee53c4ef1297
TargetRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
Cost : 10
TargetTransportServers : {BMAIL}
ExchangeLegacyDN : /o=Biotone/ou=First Administrative Group/cn=Configuration/cn=Connections/cn=Exchange RGC
PublicFolderReferralsEnabled : True
SourceRoutingGroup : First Routing Group
SourceTransportServers : {BIOMAIL}
HomeMTA : Microsoft MTA
HomeMtaServerId : BIOMAIL
MaxMessageSize : unlimited
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Exchange RGC
DistinguishedName : CN=Exchange RGC,CN=Connections,CN=First Routing Group,CN=Routing Groups,CN=First Adminis
trative Group,CN=Administrative Groups,CN=Biotone,CN=Microsoft Exchange,CN=Services,CN=C
onfiguration,DC=corp,DC=biotone,DC=com
Identity : Exchange RGC
Guid : eb38752c-a3f1-4f9b-b9f3-d872ffcaa316
ObjectCategory : corp.biotone.com/Configuration/Schema/ms-Exch-Routing-Group-Connector
ObjectClass : {top, msExchConnector, msExchRoutingGroupConnector}
WhenChanged : 9/10/2013 5:20:02 PM
WhenCreated : 9/10/2013 5:19:47 PM
WhenChangedUTC : 9/11/2013 12:20:02 AM
WhenCreatedUTC : 9/11/2013 12:19:47 AM
OrganizationId :
OriginatingServer : biopdc.corp.biotone.com
IsValid : True

[PS] C:\Windows\system32>get-transportserver |fl

RunspaceId : 6dda6307-3761-4a19-9723-ee53c4ef1297
Name : BMAIL
AntispamAgentsEnabled : False
ConnectivityLogEnabled : True
ConnectivityLogMaxAge : 30.00:00:00
ConnectivityLogMaxDirectorySize : 1000 MB (1,048,576,000 bytes)
ConnectivityLogMaxFileSize : 10 MB (10,485,760 bytes)
ConnectivityLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\Connectivity
DelayNotificationTimeout : 04:00:00
ExternalDNSAdapterEnabled : True
ExternalDNSAdapterGuid : 00000000-0000-0000-0000-000000000000
ExternalDNSProtocolOption : Any
ExternalDNSServers : {}
ExternalIPAddress :
InternalDNSAdapterEnabled : True
InternalDNSAdapterGuid : 00000000-0000-0000-0000-000000000000
InternalDNSProtocolOption : Any
InternalDNSServers : {}
MaxConcurrentMailboxDeliveries : 20
MaxConcurrentMailboxSubmissions : 20
MaxConnectionRatePerMinute : 1200
MaxOutboundConnections : 1000
MaxPerDomainOutboundConnections : 20
MessageExpirationTimeout : 2.00:00:00
MessageRetryInterval : 00:01:00
MessageTrackingLogEnabled : True
MessageTrackingLogMaxAge : 30.00:00:00
MessageTrackingLogMaxDirectorySize : 1000 MB (1,048,576,000 bytes)
MessageTrackingLogMaxFileSize : 10 MB (10,485,760 bytes)
MessageTrackingLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\MessageTracking
IrmLogEnabled : True
IrmLogMaxAge : 30.00:00:00
IrmLogMaxDirectorySize : 250 MB (262,144,000 bytes)
IrmLogMaxFileSize : 10 MB (10,485,760 bytes)
IrmLogPath : C:\Program Files\Microsoft\Exchange Server\V14\Logging\IRMLogs
ActiveUserStatisticsLogMaxAge : 30.00:00:00
ActiveUserStatisticsLogMaxDirectorySize : 250 MB (262,144,000 bytes)
ActiveUserStatisticsLogMaxFileSize : 10 MB (10,485,760 bytes)
ActiveUserStatisticsLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ActiveUsersStats
ServerStatisticsLogMaxAge : 30.00:00:00
ServerStatisticsLogMaxDirectorySize : 250 MB (262,144,000 bytes)
ServerStatisticsLogMaxFileSize : 10 MB (10,485,760 bytes)
ServerStatisticsLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ServerStats
MessageTrackingLogSubjectLoggingEnabled : True
OutboundConnectionFailureRetryInterval : 00:10:00
IntraOrgConnectorProtocolLoggingLevel : None
PickupDirectoryMaxHeaderSize : 64 KB (65,536 bytes)
PickupDirectoryMaxMessagesPerMinute : 100
PickupDirectoryMaxRecipientsPerMessage : 100
PickupDirectoryPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Pick
up
PipelineTracingEnabled : False
ContentConversionTracingEnabled : False
PipelineTracingPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\PipelineTracing
PipelineTracingSenderAddress :
PoisonMessageDetectionEnabled : True
PoisonThreshold : 2
QueueMaxIdleTime : 00:03:00
ReceiveProtocolLogMaxAge : 30.00:00:00
ReceiveProtocolLogMaxDirectorySize : 250 MB (262,144,000 bytes)
ReceiveProtocolLogMaxFileSize : 10 MB (10,485,760 bytes)
ReceiveProtocolLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ProtocolLog\SmtpReceive
RecipientValidationCacheEnabled : False
ReplayDirectoryPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Repl
ay
RootDropDirectoryPath :
RoutingTableLogMaxAge : 7.00:00:00
RoutingTableLogMaxDirectorySize : 50 MB (52,428,800 bytes)
RoutingTableLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\Routing
SendProtocolLogMaxAge : 30.00:00:00
SendProtocolLogMaxDirectorySize : 250 MB (262,144,000 bytes)
SendProtocolLogMaxFileSize : 10 MB (10,485,760 bytes)
SendProtocolLogPath : C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs
\ProtocolLog\SmtpSend
TransientFailureRetryCount : 6
TransientFailureRetryInterval : 00:05:00
AntispamUpdatesEnabled : False
InternalTransportCertificateThumbprint : 5167F82BDE5E0C8165400FF25325688FE140A7AA
TransportSyncEnabled : False
TransportSyncPopEnabled : False
WindowsLiveHotmailTransportSyncEnabled : False
WindowsLiveContactTransportSyncEnabled : False
TransportSyncExchangeEnabled : False
TransportSyncImapEnabled : False
MaxNumberOfTransportSyncAttempts : 3
MaxActiveTransportSyncJobsPerProcessor : 16
HttpTransportSyncProxyServer :
HttpProtocolLogEnabled : False
HttpProtocolLogFilePath :
HttpProtocolLogMaxAge : 7.00:00:00
HttpProtocolLogMaxDirectorySize : 250 MB (262,144,000 bytes)
HttpProtocolLogMaxFileSize : 10 MB (10,485,760 bytes)
HttpProtocolLogLoggingLevel : None
TransportSyncLogEnabled : False
TransportSyncLogFilePath :
TransportSyncLogLoggingLevel : None
TransportSyncLogMaxAge : 30.00:00:00
TransportSyncLogMaxDirectorySize : 10 GB (10,737,418,240 bytes)
TransportSyncLogMaxFileSize : 10 MB (10,485,760 bytes)
TransportSyncHubHealthLogEnabled : False
TransportSyncHubHealthLogFilePath :
TransportSyncHubHealthLogMaxAge : 30.00:00:00
TransportSyncHubHealthLogMaxDirectorySize : 10 GB (10,737,418,240 bytes)
TransportSyncHubHealthLogMaxFileSize : 10 MB (10,485,760 bytes)
TransportSyncAccountsPoisonDetectionEnabled : False
TransportSyncAccountsPoisonAccountThreshold : 2
TransportSyncAccountsPoisonItemThreshold : 2
TransportSyncAccountsSuccessivePoisonItemThreshold : 3
TransportSyncRemoteConnectionTimeout : 00:01:40
TransportSyncMaxDownloadSizePerItem : 25 MB (26,214,400 bytes)
TransportSyncMaxDownloadSizePerConnection : 50 MB (52,428,800 bytes)
TransportSyncMaxDownloadItemsPerConnection : 1000
DeltaSyncClientCertificateThumbprint :
UseDowngradedExchangeServerAuth : False
IntraOrgConnectorSmtpMaxMessagesPerConnection : 20
IsValid : True
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=BMAIL,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SP
DLT),CN=Administrative Groups,CN=Biotone,CN=Microsoft Exchange,CN=
Services,CN=Configuration,DC=corp,DC=biotone,DC=com
Identity : BMAIL
Guid : 62f4b2f1-c428-4f35-ab4a-163acc0ec577
ObjectCategory : corp.biotone.com/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass : {top, server, msExchExchangeServer}
WhenChanged : 9/5/2013 4:31:30 PM
WhenCreated : 8/14/2013 5:07:00 PM
WhenChangedUTC : 9/5/2013 11:31:30 PM
WhenCreatedUTC : 8/15/2013 12:07:00 AM
OrganizationId :
OriginatingServer : biopdc.corp.biotone.com

[PS] C:\Windows\system32>get-transportconfig

ClearCategories : True
ConvertDisclaimerWrapperToEml : False
DSNConversionMode : UseExchangeDSNs
ExternalDelayDsnEnabled : True
ExternalDsnDefaultLanguage :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority :
ExternalDsnSendHtml : True
ExternalPostmasterAddress :
GenerateCopyOfDSNFor : {}
HygieneSuite : Standard
InternalDelayDsnEnabled : True
InternalDsnDefaultLanguage :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority :
InternalDsnSendHtml : True
InternalSMTPServers : {}
JournalingReportNdrTo : <>
LegacyJournalingMigrationEnabled : False
MaxDumpsterSizePerDatabase : 18 MB (18,874,368 bytes)
MaxDumpsterTime : 7.00:00:00
MaxReceiveSize : 488.3 MB (512,000,000 bytes)
MaxRecipientEnvelopeLimit : 100
MaxSendSize : unlimited
MigrationEnabled : False
OpenDomainRoutingEnabled : False
Rfc2231EncodingEnabled : False
ShadowHeartbeatRetryCount : 12
ShadowHeartbeatTimeoutInterval : 00:15:00
ShadowMessageAutoDiscardInterval : 2.00:00:00
ShadowRedundancyEnabled : True
SupervisionTags : {Reject, Allow}
TLSReceiveDomainSecureList : {}
TLSSendDomainSecureList : {}
VerifySecureSubmitEnabled : False
VoicemailJournalingEnabled : True
HeaderPromotionModeSetting : NoCreate
Xexch50Enabled : True

[PS] C:\Windows\system32>

Scott Johnston

ASKER

Nothing is working