SrikantRajeev
asked on
PBX connectivity with Cisco
I have PBX with interface type TTC2M J1. I want to connect this interface to Cisco 2811 router.
Would like to check if this will work to connect TTC2M J1 to VMIC2-2MFT T1/E1 interface.
If so how it is possible & what protocols are used for the communication.
Would like to check if this will work to connect TTC2M J1 to VMIC2-2MFT T1/E1 interface.
If so how it is possible & what protocols are used for the communication.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
thanks
ASKER
Thanks
http://www.cisco.com/en/US/docs/routers/access/2600/hardware/notes/j1vwic.html#wp1019465
You'll have to check Cisco's site to see if J1 cards are still supported on the 2811s.