configure hotspot to share internet conection from PC(windows7)

I have a wired internet connection in my room which is provided by building owner.
Authenticate by username and password to login.

I want to share my internet to access from my mobile (Android and Iphone).
I tried this still no avail.
http://www.experts-exchange.com/Networking/Windows_Networking/Q_27998527.html

Is there anyway I can connect my phone to my PC and access internet?
LVL 31
MAS (MVE)EE Solution Guide - Technical Dept HeadAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

David Johnson, CD, MVPOwnerCommented:
use a wireless router
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
I have to login to a browser using the credentials provided.

Then only I will get internet access.

Is it possible to do the same in router

I mean authenticate using router
0
David Johnson, CD, MVPOwnerCommented:
yes it is possible for the router to authenticate using pptp
0
Newly released Acronis True Image 2019

In announcing the release of the 15th Anniversary Edition of Acronis True Image 2019, the company revealed that its artificial intelligence-based anti-ransomware technology – stopped more than 200,000 ransomware attacks on 150,000 customers last year.

MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
ok let me try
0
David Johnson, CD, MVPOwnerCommented:
like so in the wan options
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
Do you think it will authenticate same as in IE/browser authentication?

Just wanted to know
0
David Johnson, CD, MVPOwnerCommented:
YES and you don't need to use the dial up settings on the operating systems
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
So I will select Dynamic and PPTP?
0
David Johnson, CD, MVPOwnerCommented:
you can only select 1 and it will be PPTP OR l2TP depending upon your carrier.
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
It is connecting to a firewall I guess before router which checks authentication.
0
David Johnson, CD, MVPOwnerCommented:
you have to first log into the router

cable modem OR dsl modem -> router wan port -> router lan port -> pc
some times you can configure the dsl modem to automatically login.
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
It didn't help
There is only 2 options dynamic or static
if static I have only 2 options which is PPPoE and PPPoA.
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
your help is appreciated
0
Davis McCarnOwnerCommented:
The most common form of web-based authentication is ssl which is not going to be supported by virtually all routers.
What you need to do is to purchase another NIC for the Windows 7 PC (you need to know if it has PCI or PCI Express x1 slots), change the routers ip address to 192.168.10.1 so it doesnt conflict with ICS (Internet Connection Sharing), plug the Internet/Wan port for the router into the new NIC, and setup ICS to share the NIC which goes to the building.
http://windows.microsoft.com/en-us/windows7/set-up-a-shared-internet-connection-using-ics-internet-connection-sharing
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
@DavisMcCarn
Many thanks to your reply
You mean I will connect the new NIC to the wan port of router(my router)
and the existing NIC in which I will configure ICS which will go to building router?

if yes
I will give static IP to the new NIC which is 192.168.10.1 and router 192.168.10.2?
Will it route auitomatic to the first NIC (ICS enabled NIC) ?

If no please explain.. Appreciated your help
Awaiting your reply
0
Davis McCarnOwnerCommented:
The issue is a circular loop.  By default, ICS will assign 192.168.0.1 to the new NIC and, if you leave your router at the same ip, it won't work.
That is why I told you to set the router to 192.168.10.1 BEFORE you setup ICS.
0
MAS (MVE)EE Solution Guide - Technical Dept HeadAuthor Commented:
Many thanks to both specially DavisMcCarn
I connected another NIC and configured DHCP in the win7 PC

I appreciate if you tell me a free DHCP software name.
I am using now Tiny DHCP but it works for 30-60 minutes and it pops up for registration code
I have to restart the PC
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Windows 7

From novice to tech pro — start learning today.