Windows 2012 Hyper-V server Guest OS has no Internet Access

Here is my environment:
  - I have a Windows 2012 server with Hyper-V enabled (Host 1)
  - I have a Windows 2012 Hyper-V server (Host 2)
  - Host 1 IP address 10.254.0.11
  - Host 2 IP address 10.254.0.201
  - Hosts connect to a gigabit switch
  - Network connected to a Cisco RV042
  - Default gateway 10.254.0.1

Here is my problem:
  - I have a guest server on both hosts
  - Host 1 can ping 8.8.8.8
  - Host 2 can ping 8.8.8.8
  - Guest on Host 1 can ping 8.8.8.8 (Guest 1)
  - Guest on Host 2 cannot ping 8.8.8.8 (Guest 2) - PING: transmit failed, General failure
  - Guest 1 IP address 10.254.0.31
  - Guest 2 IP address 10.254.0.32
  - Host 2 can ping Guest 2
  - Guest 1 can ping Guest 2
  - Guest 2 can ping Guest 1
  - Guest 2 can ping the router
  - The router can ping Guest 2

Any ideas??
George PerolliSenior Systems AdministratorAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

dextermainCommented:
Check the gateway for Guest on Host 2.
If correct via Windows Interface

Check using Command Prompt
type "route print" <without the " >

check network interface settings
type "ipconfig /all" <without the " >
0
mijaredCommented:
Can you check the default gateway on Guest 2? sounds like it either is resolving the DNS to access the web or the gateway is wrong.

Try a route print in the command prompt and compare the 2 guests
0
George PerolliSenior Systems AdministratorAuthor Commented:
One thing that I did not mention was that this was the result of a P2V.  I removed the NIC and then added it again and the problem went away.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
dextermainCommented:
The below could have provided the answers that could have helped to get this solved.

Check the gateway for Guest on Host 2.
If correct via Windows Interface

Check using Command Prompt
type "route print" <without the " >

check network interface settings
type "ipconfig /all" <without the " >
0
George PerolliSenior Systems AdministratorAuthor Commented:
Because I resolved the problem
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Remote Access

From novice to tech pro — start learning today.