Cisco Network Routing Issue

Hello Experts,

Can someone please take a look at the attached configuration and please shed some light on why I can't ping the Dialer interface?




Thanks in advance for your help.

cheers

Carlton
cpatte7372Asked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

cpatte7372Author Commented:
Experts,

I mean the dialer interfaces own ip address
0
peeaCommented:
There is no configuration file attached.
0
cpatte7372Author Commented:
Experts,

I should point out the virtual-access2 keeps on bouncing

Sep 17 08:37:44.047: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up

UK01135-RDM01-ColmoreRd#show interfaces dialer 1
Dialer1 is up, line protocol is up (spoofing)
  Hardware is Unknown
  Internet address is 80.229.77.203/29
  MTU 1500 bytes, BW 56 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, LCP Closed, loopback not set
  Keepalive set (10 sec)
  DTR is pulsed for 1 seconds on reset
  Interface is bound to Vi2
  Last input never, output never, output hang never
  Last clearing of "show interface" counters 17:37:42
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     12346 packets input, 745390 bytes
     17286 packets output, 243231 bytes
Bound to:
Virtual-Access2 is up, line protocol is up
  Hardware is Virtual Access interface
  MTU 1500 bytes, BW 1064 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, LCP Open
  Stopped: IPCP
  PPPoATM vaccess, cloned from Dialer1
  Vaccess status 0x44
  Bound to ATM0/0/0 VCD: 1, VPI: 0, VCI: 38, loopback not set
  Keepalive set (10 sec)
  DTR is pulsed for 5 seconds on reset
  Interface is bound to Di1 (Encapsulation PPP)
  Last input 00:00:00, output never, output hang never
  Last clearing of "show interface" counters 17:36:24
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     17972 packets input, 1082962 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     17483 packets output, 246037 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
UK01135-RDM01-ColmoreRd#
0
Determine the Perfect Price for Your IT Services

Do you wonder if your IT business is truly profitable or if you should raise your prices? Learn how to calculate your overhead burden with our free interactive tool and use it to determine the right price for your IT services. Download your free eBook now!

cpatte7372Author Commented:
Oops,

Attached, is the configuration
09-05-46--172.17.141.38-172.17.1.txt
0
cpatte7372Author Commented:
Peea/Experts,

The configuration is attached.
0
naderzCommented:
does ppp go up? should be able to ping if ppp is up.

question: your tunnel interface's source is the dialer and then you have "ip nat inside" on that interface. The default route is also pointing to the dialer interface and not the tunnel. That's all intentional?
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
cpatte7372Author Commented:
Hi naderz,

Sorry for the delayed response.

Yes, it's intentional. Why?
0
cpatte7372Author Commented:
Cheers
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.