Sonicwall TZ 210w Fail-over configuration

Posted on 2013-09-17
Medium Priority
Last Modified: 2013-12-02
Have a Sonicwall TZ-210w Configured with Comcast Cable Internet. We also have an AT&T T-1 that is configured for a few of our phones to use for SIP calling, plugged directly into it's own switch. How do I configure the Sonicwall to use the T-1 in a fail-over situation when Comcast goes down? Obviously I would connect the AT&T T-1 to the Sonicwall, but from there what do I need to do in the web interface?
Question by:Agility_Kolb
1 Comment
LVL 30

Accepted Solution

Blue Street Tech earned 2000 total points
ID: 39500063
Hi Agility_Kolb,

Basically you will need to configure WAN Fail-over Load balancing & Probe settings. I'd plug the second WAN into X2.

Here is the step-by-step to follow on how to setup the second WAN connection: https://www.fuzeqna.com/sonicwallkb/ext/kbdetail.aspx?kbid=7781

After that, follow this step-by-step to setup the Fail-over Load Balancing & Probing: https://www.fuzeqna.com/sonicwallkb/ext/kbdetail.aspx?kbid=7828

Let me know if you have any questions!

Featured Post

Managing Security Policy in a Changing Environment

The enterprise network environment is evolving rapidly as companies extend their physical data centers to embrace cloud computing and software-defined networking. This new reality means that the challenge of managing the security policy is much more dynamic and complex.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Make the most of your online learning experience.
If you try to migrate from Elastix to Issabel, you will face a lot of issues. These problems are inevitable but fortunately, you can fix them. In the guide below, I will explain how I performed the migration while keeping all data and successfully t…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …

619 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question