Aruba 2400 Wireless AP issues

I have few issues going on with an old site having Aruba 2400.

1. In network summary page , I see 18 AP is DOWN but they ping fine and have a special network address scope. How can I turn it UP and active. I tried rebooting Master & Local controllers twice.

2. There are three SSID created and I need to take one of the AP in another SSID group. Is it possible ?

3. I have 5.0.3.3 OS in my mobility controller and looking forward to upgrade the OS. Any other source besides Aruba Accounts ?

4. If I have MAC address of the AP through InnSIDDER and I need to know the IP address of one of the AP. I cannot find any search option to search MAC address.
LVL 12
ibrahim52Team LeaderAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Jakob DigranesSenior ConsultantCommented:
#1: Have you done any changes since they turned down?
Since they have been connected before - you either deployed some firewall rules between AP-scope and Controller or you changed controllers IP-addresses.
You say you have a master and a local controller. Are they at the same Site/Subnet?
Have you configured LMS-IP in AP System Profile?
in CLI - do a show ap system-profile to see what profiles you have.
Then do a show ap system-profile PROFILE-NAME to see lms-ip for profile. If this is blank, or it shows something other than local controllers IP - change it. Or, if you only have default - create a new one for the site with the local controller - and add the correct LMS-IP and assign it to the AP GROUP you have.

#2. yes - you can have several AP-GROUPs - just reprovision the AP you need to change in to the new group

#3. The 2400 controller cannot be upgraded to anymore than 5.0.4.13 --- should be rather straight forward, been a while since I've upgraded in the 5-series

#4. Think you should be able to do this in CLI
show ap database | include MAC-ADDRESS (or some part of the mac-address)
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
ibrahim52Team LeaderAuthor Commented:
I've requested that this question be deleted for the following reason:

The respond was posted very late and I still have the issue but I am still correcting it.
0
Jakob DigranesSenior ConsultantCommented:
uhm ----- if you still have the issue and still need correcting it - then you could respond to #1 which need YOUR input to be able to move forward.

the other parts are in fact answered
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Wireless Networking

From novice to tech pro — start learning today.