thecavalry
asked on
Netscaler VPX VIP issue
We are using a Netscaler VPX HA pair for load balancer, originally had 2 Arm configuration which DMZ hosts all VIP’s. This was working fine.
Configured multiple VLAN’s bound per Interface as Untagged VLAN’s, Configured VMware port Group to Tag VLAN traffic. SNIP’s are configured for each Subnet and Bound to the respective VLAN. Configured Load Balancing where Virtual Servers (VIP’s) are on the same subnet as the Server.
I can now reach servers through VIP’s when I try to access them from same subnet. But not from other Internal Subnets or Internet. Routing is fine and I can reach servers directly from other subnets when allowed through ACL’s. Any Help would be great.
Configured multiple VLAN’s bound per Interface as Untagged VLAN’s, Configured VMware port Group to Tag VLAN traffic. SNIP’s are configured for each Subnet and Bound to the respective VLAN. Configured Load Balancing where Virtual Servers (VIP’s) are on the same subnet as the Server.
I can now reach servers through VIP’s when I try to access them from same subnet. But not from other Internal Subnets or Internet. Routing is fine and I can reach servers directly from other subnets when allowed through ACL’s. Any Help would be great.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.