Windows 2012 NIC Teaming Access Multiple VLANs

We have 2 Hyperv 2012 hosts in failover cluster.  On each server 2NIC are teamed and is used for VM traffic. At the moment I have VMs on the HyperVhost on VLAN 500. I want to have VMs on VLAN 200.
So on the cisco switch. I have made the 4VM Ports( 2 from each server) as Trunk Ports.
What do I need to do on the HyperV host so that  I can have VMs on VLAN 200. Below is  port configuration of one switch ports

Name: fa0/19
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 500 (VLAN0500)
Trunking Native Mode VLAN: 500 (VLAN0500)
Administrative Native VLAN tagging: enabled
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk associations: none
Administrative private-vlan trunk mappings: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
LVL 23
Malli BoppeAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
at present you have set a default vlan (access VLAN) of 500, so all traffic which arrive on the switch port is on 500.

if you want to use VLANs 200 and 500 simultaneously on the switch port, you will need to use 802.1Q Tags.

e.g.

switchport trunk encapsulation dot1q
 switchport trunk allowed vlan 200,500
 switchport mode trunk

you can still keep the default in place, but you will then need to start tagging traffic from the Server, by creating new "virtual networks" with the VLAN Tag of 200 and 500.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
Malli BoppeAuthor Commented:
Thanks hanccocka

Can please tell how you do the below stuff

"you can still keep the default in place, but you will then need to start tagging traffic from the Server, by creating new "virtual networks" with the VLAN Tag of 200 and 500"
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Windows Server 2012

From novice to tech pro — start learning today.