jct_777
asked on
Windows Server 2012 & 2008
Dear All,
We have 3 physical servers here in our organization. Visualized all the servers. Each physical servers are containing five virtual servers in it.
there is no internet connection in the servers. only weekly we update the servers by providing different ip range in it.
for internal access the servers are having 192.128.10. ip .
for internet we are giving 192.168.100. . after giving this IP internet connection is there in the servers. i can browse the sites. but i am unable to update the windows. always shows error. even i added the Microsoft site in the trusted sites but same issues
Error File attached.
So what i do sometimes i disable the 192.168.10. ip range but still the same problem.
Here the servers are windows server 2012 & Server 2008
Regards,
JCT
Update-Error.jpg
We have 3 physical servers here in our organization. Visualized all the servers. Each physical servers are containing five virtual servers in it.
there is no internet connection in the servers. only weekly we update the servers by providing different ip range in it.
for internal access the servers are having 192.128.10. ip .
for internet we are giving 192.168.100. . after giving this IP internet connection is there in the servers. i can browse the sites. but i am unable to update the windows. always shows error. even i added the Microsoft site in the trusted sites but same issues
Error File attached.
So what i do sometimes i disable the 192.168.10. ip range but still the same problem.
Here the servers are windows server 2012 & Server 2008
Regards,
JCT
Update-Error.jpg
ASKER
Hi,
Microsoft site is not opening. But i can open google & other sites
how to trace the route.
Regards,
JCT
Microsoft site is not opening. But i can open google & other sites
how to trace the route.
Regards,
JCT
Try the command "tracert microsoft.com" from command prompt
ASKER
I run the above mentioned command . attached is the result.
error.jpg
error.jpg
It is reaching upto 192.168.6.1
You will have to check your VM configuration as it is not going after 192.168.6.1
You will have to check your VM configuration as it is not going after 192.168.6.1
ASKER
How to check that . do i need to alter some settings in VM Ware. the VM was configured by another person who already left from here.
Please help as i need to update all my servers.
For SCCM i need the sccm server to be update. If you can guide me then I can do it
Regards,
JCT
Please help as i need to update all my servers.
For SCCM i need the sccm server to be update. If you can guide me then I can do it
Regards,
JCT
VM running on windows or ESX?
ASKER
Vm running on Esxi 5.0.1
ASKER
Dear Abbasiftt,
i went through the link in youtube. to perform that i need to shutdown all the virtual servers & restart the server. this i won't be able to do .these are all live severs. i can't restart. near to 800 clients are there. please suggest me any other options.
Regards,
Jct
i went through the link in youtube. to perform that i need to shutdown all the virtual servers & restart the server. this i won't be able to do .these are all live severs. i can't restart. near to 800 clients are there. please suggest me any other options.
Regards,
Jct
ASKER
Please experts,
Help me in this issue. this is really creating headache for me. as i told before my all the servers are not updated for the last two months.
Please help me in resolving this .
Regards,
JCT
Help me in this issue. this is really creating headache for me. as i told before my all the servers are not updated for the last two months.
Please help me in resolving this .
Regards,
JCT
ASKER
Good Morning Experts,
Please help me in resolving this issue
JCT
Please help me in resolving this issue
JCT
It all comes down to the default gateway. Instead of changing subnets why don't you just block Internet on the main subnet and then Allow it when you want to do updates?
If you want to do the way you have it now, change the default gateway to the one with Internet.
If you want to do the way you have it now, change the default gateway to the one with Internet.
ASKER
i did'nt understand . Can you please explain how to do that.
Regards,
JCT
Regards,
JCT
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
so do i need to change only the gateway. If yes then do i need to restart the server & enter the settings .
presently there are two network adapters in all the virtual servers.
192.168.100. is the internal ip & the default gateway is 192.168.100.1(no internet )
internet ip is 192.168.1. & the gateway for this is 192.168.1.1
so do i need to enter the internet gateway i.e. 192.168.1.1
Please guide.
Regards,
JCT
presently there are two network adapters in all the virtual servers.
192.168.100. is the internal ip & the default gateway is 192.168.100.1(no internet )
internet ip is 192.168.1. & the gateway for this is 192.168.1.1
so do i need to enter the internet gateway i.e. 192.168.1.1
Please guide.
Regards,
JCT
Yes. The gateway is where traffic outside your known subnets and routes goes, like the Internet.
ASKER
Can i ask one more question. just to clarify if there was gateway issue i was accessing all the websites except Microsoft without any issues. not able to update also.
just for clarification only.
Regards,
JCT
just for clarification only.
Regards,
JCT
I believe if the computer tried to access Microsoft before the ip with the Internet was added it can "remember" that bad route.
ASKER
I believe the ESXI server ip is 192.168.100.10 if i give the default ip 192.168.1.1 will it accept.
Waiting for your reply
Regards,
JCT
Waiting for your reply
Regards,
JCT
ASKER
Sorry. i meant if i give the default gateway ip of internet i.e. 192.168.1.1 will it accept.
JCT
JCT
Yes. But you could easily just try it.
ASKER
Will update after configuring the new default Gateway in ESXI
Regards,
JCT
Regards,
JCT
ASKER
Hi ,
I performed the above step. configured Internet IP gateway.
problem still exists (windows not updating)
Regards,
JCT
I performed the above step. configured Internet IP gateway.
problem still exists (windows not updating)
Regards,
JCT
ASKER
Dear All,
Please help me solving this problem.
JCT
Please help me solving this problem.
JCT
I suspect you will have to call in a paid professional JCT. I've been following your question for a while now and I have to say I am confused. I have seen no less than four subnets mentioned. The topology is quite odd. I don't understand why things are being implemented the way they are as it introduces a risk that some roles (SQL in particular) would not like. And to top it off, it is built on a VMware implementation that you have stated you did not set up, and are not sure how to manage.
If you can't understand your own environment, I doubt anybody in EE can help you manage it. Hiring a paid professional as a consultant for a few hours to discuss your environment, document it, and make necessary changes to make the network manageable would quickly pay for itself. There is *no* lost revenue in taking that step and I think it is what you will have to do being nobody here has been able to help.
-Cliff
If you can't understand your own environment, I doubt anybody in EE can help you manage it. Hiring a paid professional as a consultant for a few hours to discuss your environment, document it, and make necessary changes to make the network manageable would quickly pay for itself. There is *no* lost revenue in taking that step and I think it is what you will have to do being nobody here has been able to help.
-Cliff
ASKER
Thanks Cliff for your suggestions. i am not closing this question now.
let me try to call somebody locally here. after that i will update the status.
Regards,
JCT
let me try to call somebody locally here. after that i will update the status.
Regards,
JCT
Did you try tracing the route and check where it is stopping?