GioPiro
asked on
Cisco 6509E FWSM connectiong problem
Hello.
I'm using 6509Es in VSS mode. One of my fwsm spoiled. So we had changed it.
How can I configure the new one?
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a0080531753.shtml
I tried this but it didn't help.
when I'm using
"Core01#ses sw 2 slo 3 pro 2
Core01#"
there is nothing
"Core01#ses sw 2 slo 3 pro 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.1.31 ...
% Connection timed out; remote host not responding"
I'm using 6509Es in VSS mode. One of my fwsm spoiled. So we had changed it.
How can I configure the new one?
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a0080531753.shtml
I tried this but it didn't help.
when I'm using
"Core01#ses sw 2 slo 3 pro 2
Core01#"
there is nothing
"Core01#ses sw 2 slo 3 pro 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.1.31 ...
% Connection timed out; remote host not responding"
ASKER
No I have 2 switches in VSS.
Look:
"Core01#session switch 1 slot 3 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.31 ... Open
User Access Verification
Password:
"
It's FWSM in first 6509.
Look:
"Core01#session switch 1 slot 3 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.31 ... Open
User Access Verification
Password:
"
It's FWSM in first 6509.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I have found
Hi,
I have the same kinda issue. Would you please explain the solution?
Thank you
NetRock
I have the same kinda issue. Would you please explain the solution?
Thank you
NetRock
session slot [slot#] pr 1
So if the FWSM is in slot 2 then the command would be
sess slot 2 pr 1