Use WYSE to RDP to a VM on network

I have a WYSE Clients Model # WT3125se
I want to be able to RDP into the VM clinet workstation on the network.
I have enable remote on the VM with
 IP 192.168.1.5
 Subnet 255.255.255.0
GW 192.168.1.1
DNS 192.168.1.5

I have DHCP enable at router ( Cisco RV220W )

what exactly do I need to do to make the connect from the WYSE to the VM???

Thanks all

do I just have to put in the
LVL 1
noadAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

strivoliCommented:
...the IP address of the remote host: 192.168.1.5.
0
noadAuthor Commented:
yes
0
noadAuthor Commented:
sorry the DNS is 192.168.1.10
0
10 Tips to Protect Your Business from Ransomware

Did you know that ransomware is the most widespread, destructive malware in the world today? It accounts for 39% of all security breaches, with ransomware gangsters projected to make $11.5B in profits from online extortion by 2019.

Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Setup an RDP Connection on the thin client and use the VMs IP address.

You can test it working from a Windows XP workstation.
0
noadAuthor Commented:
so just create an RDP on the thin client
with the ip of the VM correct?
0
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
That's Correct.

You should have two default

Create ICA Connection
Create RDP Connection

On that device by default
0
noadAuthor Commented:
yes right now it was set up using ICA

do I need to do anything to make is work with RDP?
I do see where I can choose RDP
0
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Yes create a new RDP connection ICA is a different protocol you cannot use ICA to connect to a RDP session.
0
noadAuthor Commented:
ok....


I ask b/c they where using ICA to connect to a VM machine ....
not the one that I want to connect to a diff one.
The one that I want to connect to lives in a Hyper-V server.
I'll try it on Monday and let you know
0
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Yes, it's likely they were connecting to a Citrix Server, which uses ICA.
0
noadAuthor Commented:
I see...

Well I will be connecting to a WIN2008 R2 srv so using RDP is the correct way to go, right?
0
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Correct, Win2k8 R2 supports RDP out of the box, when ENABLED!
0
noadAuthor Commented:
true...
ok I'll give it a try and let you know how it went


Thanks for all of your help
0
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
No problems
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
noadAuthor Commented:
Worked perfectly
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Citrix

From novice to tech pro — start learning today.