How to print a logo on an Okidata Printer

We have an Okidata printer, OKIPOS 441 w/cutter. We have stored a logo on this printer and what we want to know is: What is the instruction set that we will need to send to this printer so it can print the logo on the top of each printout.

The printout is being sent from an AS/400 session and the printer is configured as a network printer on the AS/400.
Who is Participating?
DansDadUKConnect With a Mentor Commented:
For example, if you are using ESC/POS, this manual describes (albeit for Star Line Printers) various ESC/POS commands associated with logos.
According to the specifications, OKIPOS 441 printers support two emulations: Star Mode & ESC/POS.

You probably first need to establish which of these your application/driver is using.

I have seen references to "Star Mode Logo store" (although I have no knowledge of this myself), so it may be worth searching for a Programmers or Developers manual using these search terms.
This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.