jlavery
asked on
Exmerge of MB data to NAS
need to exmerge all data from all mailboxes and send the pst to a mapped drive, which refers to a NAS device.
need the command syntax to send 1 mailbox to test the activity and and another to account for all mailboxes in one command if possible.
if no way to send to external drive in the command than since disk space is short the command to issue one at a time will do fine
need the command syntax to send 1 mailbox to test the activity and and another to account for all mailboxes in one command if possible.
if no way to send to external drive in the command than since disk space is short the command to issue one at a time will do fine
You should be able to just use exmerge and point it to the mapped drive.
ASKER
great.. can you pass along the proper command syntax to do so?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
@jlavery:
Can you double check the size of the individual mailboxes before you start ? You will lose information if you don't check if any mailbox is over 2 GB (in case you don't use a special procedure to run it in multiple times to create multiple PST files)
Can you double check the size of the individual mailboxes before you start ? You will lose information if you don't check if any mailbox is over 2 GB (in case you don't use a special procedure to run it in multiple times to create multiple PST files)