leblanc
asked on
Cisco CDP Neighbor command
I am looking at the sh cdp neighbor command on a 6509 switch. I am doing this remotely because the switch is 800 miles from where I am. I noticed that gig3/2 shows 3 Catalyst 2960. Does it mean that I have a hub connected to gig3/2? Thx
No not necessarily. This means that there are 3 Catalyst 2960's that are reachable through this port. These switches are likely daisy chained together, which is why they all show up under 1 port.
ASKER
I daisy chain 3 2960 and connected to a one port on my 3560 and I only see 1 2960.
is CDP enabled on all of the switches?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Device ID Local Intrfce Holdtme Capability Platform Port ID
SWI_03 Gig 8/3 173 S I WS-C2960- Fas 0/1
SWI_01 Gig 8/3 145 S I WS-C2960G Gig 0/18
SWI_02 Gig 8/3 138 S I WS-C2960S Gig 1/0/34
SWI_03 Gig 8/3 173 S I WS-C2960- Fas 0/1
SWI_01 Gig 8/3 145 S I WS-C2960G Gig 0/18
SWI_02 Gig 8/3 138 S I WS-C2960S Gig 1/0/34