Send email over Wifi with a microcontroller

I have a small Arduino Uno R3, with an Arduino WiFI shield,  project which monitors a room temperature and then sends an email to port 25. Problem is that I need to send to other than port 25 and with a username/pwd combo. I also have a Netduino 2 + which should work, but need a Wifi shield to go with it -- what shield would work? Can Netdiono send to other than port 25 with MF library? . Any other suggestions that might work like Raseberry etc?
Who is Participating?
ncsolutionConnect With a Mentor Author Commented:
I found a solution with an open source smtp client for the Net Micro Framework that works for non-wireless and wireless (Netdruino runs .Net MF),
Giovanni HewardCommented:
One suggestion would be port forwarding or PAT.  Remote host listens on 25 and forwards traffic to alternate port and host.  If initial host is a windows machine, this would look something like:

netsh interface portproxy add v4tov4 listenport=25 listenaddress= connectport=2525 connectaddress=

Open in new window

ncsolutionAuthor Commented:
works perfectly for the Netduino.....with Net Micro Framework
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.