ckangas7
asked on
Patting Single public IP to two different private IPs on Different Ports
Hello,
Have Cisco ASA 5510 version 8.4(1). Have two DVRs on my LAN.
DVR 1 = 192.168.6.7 uses port 1683-1684
DVR 2 = 192.168.3.7 uses port 1685-1687
Have a single public ip 69.1.1.3
Can't seem to PAT both of these DVRs to the same public IP. Have tried setting up NAT/PAT rules to do this, but does not seem to work. Should I be able to set these up as PUBLIC SERVERS in ASDM with a different service group (ie a separate service group for each set of ports)? Is what I'm trying to Possible. The DVRS use one port for outgoing and the other port for incoming.
Have Cisco ASA 5510 version 8.4(1). Have two DVRs on my LAN.
DVR 1 = 192.168.6.7 uses port 1683-1684
DVR 2 = 192.168.3.7 uses port 1685-1687
Have a single public ip 69.1.1.3
Can't seem to PAT both of these DVRs to the same public IP. Have tried setting up NAT/PAT rules to do this, but does not seem to work. Should I be able to set these up as PUBLIC SERVERS in ASDM with a different service group (ie a separate service group for each set of ports)? Is what I'm trying to Possible. The DVRS use one port for outgoing and the other port for incoming.
post ur config.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.