Solved

Remote Access/ Site to Site VPN Problem

Posted on 2013-10-23
1
257 Views
Last Modified: 2013-12-12
We have 2 sites connected with 2 ASA 5505s using IPSec VPN. We also have a few remote users connecting with the Anyconnect client. Remote users connect to Site 1 with no problems. The issue is that they can't then access resources at Site 2. What do I need to change to allow complete access to all internal resources?
Thanks
0
Comment
Question by:PylonAdmin
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 18

Accepted Solution

by:
Akinsd earned 500 total points
ID: 39595851
You need to modify the acl used in your crypto to allow access to the vlans.

check this out
http://www.youtube.com/watch?v=65rTOrmXUFU
0

Featured Post

Are You Ransomware's Next Victim?

Worried about ransomware attacks hitting your organization?  The good news is that these attacks are predicable and therefore preventable. Learn more about how you can  stop a ransomware attacks before encryption takes place with WatchGuard Total Security!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Occasionally, we encounter connectivity issues that appear to be isolated to cable internet service.  The issues we typically encountered were reset errors within Internet Explorer when accessing web sites or continually dropped or failing VPN conne…
Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question