How do I enable ASDM on a Cisco ASA 5510?

Hi all,
I've got a new customer with an ASA that's already configured, with the exception that he cannot access it from ASDM. He can telnet into it and it accepts his credentials, so I have access to make changes, but I'm unsure how to enable or set up this feature. Any advice?
Jonathan3Asked:
Who is Participating?
Advertise Here
 
AkinsdConnect With a Mentor Network AdministratorCommented:
You will first need to download the ASDM image file from Cisco if not already in the ASA
show flash:

You will also need to enable SSH and https access

http://software.cisco.com/download/release.html?mdfid=279916854&softwareid=280775065&release=9.1.3.ED

http://www.cisco.com/en/US/docs/security/asa/asa72/asdm52/user/guide/getstart.html


See simplified steps here

https://supportforums.cisco.com/docs/DOC-15016
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.