Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Router  adding a new network

Posted on 2013-10-24
1
354 Views
Last Modified: 2013-12-03
Currently we have a cisco router G that connects our network A to another network B.  These two networks are running  eigrp (subnet 10.0.0.0) . The problem is that now we need to add a new network C  (subnet 192.168.1.0/24) to the router G, but we don't want this new network C to see network B. We only want network A to see network C. Also network C runs under ospf.  Can this be done
0
Comment
Question by:Shen
1 Comment
 
LVL 12

Accepted Solution

by:
Henk van Achterberg earned 500 total points
ID: 39598099
There are serveral options how to solve this problem.

You can run route-maps on EIGRP so you control which networks are filtered out.

http://www.net-gyver.com/?p=1108

This way you can control what networks are begin sent to your neighbors.

Another option is to run another routing protocol, like OSPF or run a different AS number for EIGRP.
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a guide to configure bridging on Cisco Routers.  This is something I never knew was possible until after making a few phone calls to Cisco.  Using bridging saved our company money by not requiring us to purchase a new switch.  Bridgi…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question