Solved

xerox Phaser 6180 do not print as dark as usual

Posted on 2013-10-24
2
447 Views
Last Modified: 2013-11-08
Hi you guys, i have a nice xerox phaser 6180 printer, when i change the black cartridge, the intensity of the printed sheets come lower, i think is the cartridge so i replaced again and the result were the same, any advice, what might be happend
tsm
edo
0
Comment
Question by:edo60
  • 2
2 Comments
 
LVL 38

Accepted Solution

by:
hdhondt earned 500 total points
ID: 39599927
I would start by printing one of the printer's internal test pages, to see if the problem happens there as well. On the front panel, press the Menu button, go to Information Pages and print either the Menu Map or the Configuration Pages.

If they print OK then the problem is in driver settings. If they're feint as well, start by checking the paper: is it the same paper as before, or has that changed? What kind of paper is it?
0
 
LVL 38

Expert Comment

by:hdhondt
ID: 39632928
Thanks for the points edo60, but, as I gave several suggestions, could you please tell us what you did to resolve the problem.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Monitor input from a computer is usually nothing special.  In this instance it prevented anyone from using the computer.  This was a preconfiguration that didn't work.
What do we know about Legacy Video Conferencing? - Full IT support needed! - Complicated systems at outrageous prices! - Intense training required! Highfive believes we need to embrace a new alternative.
Established in 1997, Technology Architects has become one of the most reputable technology solutions companies in the country. TA have been providing businesses with cost effective state-of-the-art solutions and unparalleled service that is designed…
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

837 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question