Solved

VMware: VSC NetApp plug-in

Posted on 2013-10-24
7
1,223 Views
Last Modified: 2013-11-15
I have 3 questions in regard to the screenshot below:

1) I cannot remove the two controllers at the top (10.0.128.52 and 10.0.32.24). When I click the delete button, it says, "You cannot delete this controller". I don't know what they are, and don't think they're in use.

2) Why is there a red Alert for hosts 10.0.128.1 and 10.0.128.4? I can right click on them and choose "Set Recommended Values", but the alert comes back after the next server reboot.

3) The controller privileges do not show backup and recovery roles. It use to, but not sure why it disappeared. Where can make changes to privileges?

vSphere VSC
0
Comment
Question by:pzozulka
  • 3
  • 2
7 Comments
 
LVL 42

Accepted Solution

by:
paulsolov earned 500 total points
ID: 39599012
The IPs for the controllers could be some other storage, I have seen this before.  With respect to the alarms on the ESXi hosts that could just indicate a reboot required.  I would recommend upgrading to 8.1.2, this would allow you to install the NFS plug-in and enable hardware acceleration on the NFS Datastores.
0
 
LVL 8

Author Comment

by:pzozulka
ID: 39599046
Any thoughts on question #3?
0
 
LVL 42

Expert Comment

by:paulsolov
ID: 39638092
What are you still having an issue with?
0
 
LVL 8

Author Comment

by:pzozulka
ID: 39639103
In the image below, the notification box does not show the backup and recovery roles. Where are these roles controlled, and how can I modify/change/delete the roles displayed.

Roles
0
 
LVL 42

Expert Comment

by:paulsolov
ID: 39640237
Typically I've see where we had to create api into groups for access as we do for read only to system manager.

Try this tool, makes it easy

https://communities.netapp.com/docs/DOC-19074
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

HOW TO: Connect to the VMware vSphere Hypervisor 6.5 (ESXi 6.5) using the vSphere (HTML5 Web) Host Client 6.5, and perform a simple configuration task of adding a new VMFS 6 datastore.
Is your company's data protection keeping pace with virtualization? Here are 7 dynamic ways to adapt to rapid breakthroughs in technology.
This Micro Tutorial steps you through the configuration steps to configure your ESXi host Management Network settings and test the management network, ensure the host is recognized by the DNS Server, configure a new password, and the troubleshooting…
This Micro Tutorial walks you through using a remote console to access a server and install ESXi 5.1. This example is showing remote access and installation using a Dell server. The hypervisor is the very first component of your virtual infrastructu…

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now