Solved

IPbase to IPservices upgrade Licensing

Posted on 2013-10-25
3
525 Views
Last Modified: 2013-11-13
I bought a new switch (WS-C3750X-24P) licensed with ipbase. Currently installed IOS is C3750E-UNIVERSALK9-M

License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase

I have SMARTNET, If I want to upgrade to IPservices, license required to purchase separately. or its a free upgrade?
0
Comment
Question by:sumod_jacob
  • 2
3 Comments
 
LVL 12

Accepted Solution

by:
Henk van Achterberg earned 500 total points
ID: 39600542
it is not a free upgrade! you will have to purchase the upgrade!
0
 

Author Comment

by:sumod_jacob
ID: 39601072
I think can run evaluation for some period? (in case trouble). Is it three months?

EIGRP cause any issue if one switch using IPservices and another using IPbase in stack mode?
0
 
LVL 12

Assisted Solution

by:Henk van Achterberg
Henk van Achterberg earned 500 total points
ID: 39609641
if you want yes, please check this thread:

https://supportforums.cisco.com/message/3345903#3345903

I think you need to unstack them, use eval license, stack them again to make it work.

Both switches need to be running the same license level!
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

707 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now