Solved

Sonicwall firewall and SSL VPN

Posted on 2013-10-25
3
4,481 Views
Last Modified: 2013-12-02
Is there any step by step guideline or quick startup for

1. Sonicwall SRA 4200
2. Sonicwall Pro 4060

Tks
0
Comment
Question by:AXISHK
3 Comments
 
LVL 25

Accepted Solution

by:
Diverse IT earned 500 total points
ID: 39605585
Hi AXISHK,

SonicWALL SRA 4200. You can run a Setup Wizard on the SRA 4200 from CLI. Here's how:

For the SRA physical appliances, console access is achieved by connecting a computer to the
serial port. Use the following settings:
• Baud: 115200
• Data Bits: 8
• Parity: None
• Stop Bits: 1
For the SRA Virtual Appliance, you will see a login prompt after the firmware has fully booted.
Login as admin. The password is the same as the password for the admin account that is configured on the appliance. The default is password.

Press #1 for the Setup Wizard.
Then press <Ctrl-c> at any time to cancel changes and logout.

Otherwise your best bet is the Getting Started Guide (attached). I also attached the Admin Guide for more references.

SonicWALL Pro 4060. Once you login go to the Wizard and run the Setup Wizard. This should guide you through the initial setup. You can also use it to change basic configurations too.

Let me know if you have any questions!
Dell-SonicWALL-SRA-7.0-Admin-Gui.pdf
Dell-SonicWALL-SRA-4200-1200-Rev.pdf
1
 

Author Closing Comment

by:AXISHK
ID: 39614327
Tks
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question