Solved

CatOS and IOS Switch6509 and Switch4507

Posted on 2013-10-30
3
213 Views
Last Modified: 2014-08-01
Hi all experts!

I am migrating the 10 year old switch 6509 to a brand new switch 4507RE
I am facing some of the issues where i could not find the equivalent of the commands in the new switch 4507RE
I know there is a conversion tool from Cisco but it s 10year old and i dont have ID logon to get it
now it is my question :
1) do you know any reference table for CatOS and IOS ? please post the link if you know one exists
 2) it seems that the Policy Based Routing is not working on the new switch4507RE by default,
from the VLAN interface, i cant use the command : ip policy route-map
i ve been researching and found someones talk about the SDM template for IPV4 and IPV6
but i cant work out how to get the new switch4507RE to accept the ip policy route-map above
3) what is the equivalent of this command :
in the CatOS the command is : set trunk 2/8 on dot1q 25
4) what is the equivalent of this command :
in the CatOS, the command is : set port auxiliaryvlan 3/8 134
5) if someone kind enough to share with me the Cisco conversion tool would be great

thank you!
0
Comment
Question by:gsawan
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 3

Expert Comment

by:vyaradaikin
ID: 39722162
Is it still actual?
0
 

Accepted Solution

by:
gsawan earned 0 total points
ID: 40223230
Hi all,

I did not find a tool to convert them, I had to manually recreate all the commands
thanks!
0
 

Author Closing Comment

by:gsawan
ID: 40233722
no response received within the time frame
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Before I go to far, let's explain HA (High Availability) and why you should consider it.  High availability is the mechanism used to provide redundancy to any service at the same site and appears as a single service to the users of that service.  As…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

730 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question