Solved

Flexible Netflow Configuration Increases CPU on Cisco 1812

Posted on 2013-11-05
2
464 Views
Last Modified: 2013-11-22
Hello Community
 
I have configured our router with the following Flexible Netflow configuraton.
 
Upon configuring the device the CPU on the router has gone through roof.
 
Can someone please take a look at the configs and let me know what I can do to reduce the CPU (apart from getting rid of Netflow completely?)
 
Cheers

Carlton
16-07-39--UK00132.txt
0
Comment
Question by:cpatte7372
2 Comments
 
LVL 34

Accepted Solution

by:
Istvan Kalmar earned 500 total points
ID: 39625276
HI,

The 1812 is weak router the clear performance close to  35.84 MBps halduplex, if you configuring extra features like DMVPN and ospf it is degraded.....

please refer this guide:
http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf
0
 

Author Closing Comment

by:cpatte7372
ID: 39669854
Cheers
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question