Solved

asa 5505 vlan1

Posted on 2013-11-07
6
405 Views
Last Modified: 2013-11-13
I did a factory reset on the asa and have the defaults for vlan1 and vlan2. vlan1 has the 192.168.1.1 ip and I want ethernet0/1 to be part of that vlan. I did the:
config t
interface ethernet0/1
switchport access vlan 1 (wont take "vlan1")
no shutdown

but I still cant telnet into it, only terminal console. I can ping the 5505 from workstation and vice versa. Why wont it take?
0
Comment
Question by:tolinrome
  • 3
  • 3
6 Comments
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 39630202
Is there already something like:

telnet 192.168.1.0 255.255.255.0 inside

in the config?
0
 
LVL 7

Author Comment

by:tolinrome
ID: 39630351
no there wasnt but I just added it and still no go.
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 39630377
Could you post a (sanitized) copy of your config here so we can have a look?
0
Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

 
LVL 35

Expert Comment

by:Ernie Beek
ID: 39630389
One other thing, do you already have a user defined?

username example password example privilege 15

And set:

aaa authentication telnet console local
0
 
LVL 7

Accepted Solution

by:
tolinrome earned 0 total points
ID: 39633377
in the asdm the old interface subnet was still there, once I removed that problem solved.
0
 
LVL 7

Author Closing Comment

by:tolinrome
ID: 39644052
in the asdm the old interface subnet was still there, once I removed that problem solved.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question