?
Solved

SonicWall TZ100 X2 port to hardware VPN

Posted on 2013-11-08
2
Medium Priority
?
710 Views
Last Modified: 2013-11-08
Hi Guys, I'm trying to get my head around this.

I have a TZ100 with X1 connected to a bonded broadband setup. this works fine.

I want to connect a vpn box to X2. The local lan is 192.168.1.0 the vpn hardware is 10.10.10.0 and the local lan at the far end is 192.168.10.0

I can create a VPN from the hardware on X2 and from the far end can ping the TX100 X2 port 10.10.10.1 what would I need to do to enable traffic to flow from the far end into the local lan.

so traffic from 192.168.10.0 can see 192.168.1.0  

I know the Sonic Wall does Lan to Lan vpn. but the broadband band system doesn't like it.


Hope this makes sense.

Thanks for any help.

Regards

Paul
0
Comment
Question by:Phoenix_Technology
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
2 Comments
 
LVL 25

Accepted Solution

by:
Blue Street Tech earned 2000 total points
ID: 39634327
Hi Phoenix_Technology,

Why aren't you using the VPN within the SonicWALL itself...it's very solid and dynamic! Furthermore, this would be a best practice even if you are connecting to another non-branded SonicWALL such as Cisco or Watchguard, etc.

If you are dead set on this non-typical setup the easiest way to achieve this is through the Public Server Wizard located at the top right named Wizards of the UI once you login in to the SonicWALL.

Once you click on the Wizards link it will pull up the Configuration Wizard dialogue box. Select Public Server Wizard & click Next. On the next screen select Other... next to Server Type. Under Services you can either create your own by selecting Create New Service... or select the appropriate one from the drop down (Any is also available) then click Next. Follow the other onscreen prompts accordingly. Lastly you will use PortShielding to assign the Interface to X2.

Make sense?
0
 
LVL 25

Expert Comment

by:Blue Street Tech
ID: 39634518
Thanks for the point...glad I could help!
0

Featured Post

Four New Appliances. Same Industry-leading Speeds.

But don't take it from us.  The Firebox M370 is Miercom tested and Miercom approved, outperforming its competitors for stateless and stateful traffic throughput scenarios.  Learn more about the M370, M470, M570 and M670 and find the right solution for your organization today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

A 2007 NCSA Cyber Security survey revealed that a mere 4% of the population has a full understanding of firewalls. As business owner, you should be part of that 4% that has a full understanding.
This month, Experts Exchange’s free Course of the Month is focused on CompTIA IT Fundamentals.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Suggested Courses
Course of the Month10 days, 12 hours left to enroll

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question