Solved

Connect or Bridge device management subnet to main subnet (routing?)

Posted on 2013-11-08
4
341 Views
Last Modified: 2016-11-23
Hello Experts,

My company's main network lan subnet is 192.168.27.x (255.255.255.0)

I would like to put our devices management on another subnet 192.168.29.x  (Devices I'm refering to are switch mananement IP's, Dell Server "idrac" management, Dell Equallogics San management, etc.)

I have a SonicWall NSA 3500 that is my network's gateway @ 192.168.27.1

My goal is to allow .27's to get to .29's - basically connecting or bridging subnets.  Can you instruct me how to possibly accomplish this?

Thank you very much in advance!
0
Comment
Question by:high_sobo
  • 2
  • 2
4 Comments
 
LVL 25

Expert Comment

by:Diverse IT
ID: 39635066
Hi high_sobo,

Where does the .29 live now? How is it connecting to the SonicWALL (VPN, plugged into a port on the SonicWALL)? What does the topology look like?

Thanks.
0
 

Author Comment

by:high_sobo
ID: 39648899
diverseit,

Sorry - I guess I'm a VLAN idiot.  We have a VLAN "28" that lives on a Dell Powerconnect 8132 - but it is assigned by individual ports on the switch ... so let call that a "hardware" verision.  The SonicWall has 2 objects that route between 28 & 27 so we can get into the management of our Server & Sans.

We would like to create a VLAN "29" and put all the managemetn on it.  Make a long story short, we have a consultant coming in who is going to create the VLAN's and connect us.

Next week (hopefully) we are getting a ShoreTel phone system that started this all - our IP range is fill (27) and we want to put the phone in 26, mgmt in 29...

We just completely didn't know where to start.. so sorry I'll close this answer and give you the point for your time and effort!
0
 
LVL 25

Accepted Solution

by:
Diverse IT earned 500 total points
ID: 39649242
Ah I see. I hope everything goes successfully for you. If not ...we're here for you!
0
 

Author Comment

by:high_sobo
ID: 39649288
Thank you.. very very much diverseit!
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Microservice architecture adoption brings many advantages, but can add intricacy. Selecting the right orchestration tool is most important for business specific needs.
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now