Solved

Juniper M7i Port Aggregation

Posted on 2013-11-08
1
428 Views
Last Modified: 2013-11-14
Hello,

I would like to know if its supported to use LACP (port aggregation) using together the fixed RJ45 port and a PIC. I have the Juniper M7i.

Thank you.
0
Comment
Question by:maxihost
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 17

Accepted Solution

by:
TimotiSt earned 500 total points
ID: 39635882
Yes, it is supported.
Sample config (source: forums.juniper.net)

chassis {
    aggregated-devices {
        ethernet {
            device-count 1;
        }
    }
}
interfaces {
    ge-0/1/0 {
        gigether-options {
            802.3ad ae0;
        }
    }
    ge-1/3/0 {
        gigether-options {
            802.3ad ae0;
        }
    }
    ae0 {
        vlan-tagging;
        aggregated-ether-options {
            minimum-links 1;
            link-speed 1g;
        }
        unit 0 {   
            vlan-id 1;
            family inet {
                address 10.0.0.1/30;
            }
        }
    }

Open in new window


Tamas
0

Featured Post

Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question