Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Cannot connect to Sophos firewall

Posted on 2013-11-10
2
Medium Priority
?
498 Views
Last Modified: 2016-02-25
Hello Experts,

I am unable to get into my Sophos (hardware) firewall. I know the MAC address but not the IP address.

I tried running arp -a at the command prompt (while connected to the NIC on the firewall) to see all MAC addresses and  IP addresses on the network but the firewall  NIC MAC address does not show up.

Does anyone know how I can find the Firewall NIC's IP address?

Thanks!
0
Comment
Question by:Saxitalis
2 Comments
 
LVL 4

Accepted Solution

by:
reredok earned 1500 total points
ID: 39638581
Download:

Cisco IPSU
0
 

Author Closing Comment

by:Saxitalis
ID: 39640109
thanks - I reimaged the firewall and restored from backup so it turned out to be a non issue...
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

572 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question