Solved

Connect IPad with VPN Access to Cisco 5505

Posted on 2013-11-12
1
251 Views
Last Modified: 2014-08-05
I have one user that needs to connect to our network using an Ipad.  I have tried to get Cisco any connect working.  It connected but then said there was no license.  Is there a way to connect the ipad with a different config or do I need a license.  ASA 5505 is version 8.3
0
Comment
Question by:dupont2406
1 Comment
 
LVL 20

Accepted Solution

by:
rauenpc earned 500 total points
ID: 39642485
Although you will have 2 anyconnect licenses out of the box with a 5505, you will still need anyconnect for mobile licensing to make this work. The only other option would be to configure the cisco ipsec vpn client built into the ipad (if available). On a relatively good note, the cost for anyconnect licensing is $200 or less for the 5505, so it might not be a bad investment to get the license.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When you connect to your workplace's VPN, you may not notice that you are using your workplace's servers to serve up webpages.  This might be undesirable since the workplace can log all the places you've been.  It also might be very slow to load pag…
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question