Solved

Managed switch in a serviced office setup

Posted on 2013-11-13
2
352 Views
Last Modified: 2013-11-30
Hi all one of my customers is moving into a shared office (many companies in the same building) and has been told they will need a managed switch in the common comms room that all of their floor sockets go back to.

I have a TL-SG2424 managed switch that we can use, I assume that there will be one connection from the building services company supplying broadband into the switch and then I will have to configure the switch to pass the connection onto the other ports that the floor sockets are connected to. (I hope that makes sense)

My question is does anyone know of an example that I can follow to get this up and running.
0
Comment
Question by:Insideview
2 Comments
 
LVL 45

Accepted Solution

by:
Craig Beck earned 400 total points
ID: 39646105
You'd want to use a switch for the data outlets in the office, then use a router and firewall to keep the network separate from the building internet service (if there is one).
0
 

Author Closing Comment

by:Insideview
ID: 39686559
I took the buildings main feed into the router then sent a feed from the router back to the comms room switch (that way you dont need a managed switch)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Network Devices Audit Log 2 27
Cisco 5508 controller parsing error 4 63
EIGRP STUB 19 72
ospf neighbors not coming up 6 31
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question