Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Cisco 3750 POwer Stack

Posted on 2013-11-13
1
Medium Priority
?
678 Views
Last Modified: 2013-12-03
I would like to configure data stack and power stack using two 3750 catalyst switches.

1. Data and power stack configurations required to do in both switches before connecting stack cables (data & power)?
2. Understand data stack required only to change the member priority and connect and power on
3. Power stack required configuration in both switches?
4. Doing Power stack configuring after the power on?
0
Comment
Question by:sumod_jacob
1 Comment
 
LVL 18

Accepted Solution

by:
Akinsd earned 2000 total points
ID: 39647047
The switches should recognize the presence of the cable and autoconfigure.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/hardware/installation/guide/HIGINSTL.html
0

Featured Post

[Webinar On Demand] Database Backup and Recovery

Does your company store data on premises, off site, in the cloud, or a combination of these? If you answered “yes”, you need a data backup recovery plan that fits each and every platform. Watch now as as Percona teaches us how to build agile data backup recovery plan.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

580 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question